VAR-SOM-AM43 Start Here

From Variscite Wiki
Revision as of 17:47, 8 November 2022 by Eran (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
VAR-SOM-AM43 - First Time? Start Here.

Yocto.png

Step One: Read Documentations

Please download and read the development kit documentation. on Variscite website:
http://www.variscite.com/products/system-on-module-som/cortex-a9/var-som-am43-cpu-ti-am437x-am4376-am4377-am4378-am4379

NOTE:
Make sure you read the Quick Start Guide.

Step Two: Setup Linux host PC Development Environment

Set up your development environment.

Step Three: DVK Power Up

Power up the board.
You should have the serial cable connected to the debug port, as describe in the quick start guide
When board boots, make sure you see the u-boot prints on your host PC hyper terminal. You will need to type-in commands in the command prompt late in the development stages

IMPORTANT:
Don't continue without the serial console operating.

Step Four: A quick test with NAND recovery SD-Card

Please follow the below guide to boot DVK with a bootable SD-Card , and burn a complete yocto into NAND-Flash

Step Five: What next?

Your next step can be one of :



  • Test various interfaces : go to 'How to' section in main page.
  • Contact Support
    • support@variscite.com