DART-MX8M Debian

Warning: This page is designed to be used with a 'release' URL parameter.

This page is using the default release RELEASE_BUSTER_V3.1_DART-MX8M.
To view this page for a specific Variscite SoM and software release, please follow these steps:

1. Visit variwiki.com
2. Select your SoM
3. Select the software release

DART-MX8M Debian Buster 10

• 

Debian project is a Linux distributions for embedded devices. Debian big varities of pre-built packages and easy to customization provides rapid prototyping with minimal efforts. This release is based on NXP BSP from Yocto and Debian 10 core libraries. Variscite adds packages and configuration support its DART-MX8M System On Module.
Release version: buster-4.19.35-mx8mq-v3.1

General

General

• First Time? Start Here
• Using the recovery SD card
• DART-MX8M Changelog

Programming

• Hello World 'C' application
• TFTP & NFS

Support

• Variscite Customer Portal
  Register at Variscite Customer Portal to get high quality engineering support for Variscite products

Build

Build Debian, Linux and U-Boot

• Release Notes
• Setting a Development Environment
• Build Debian from source code
• Customizing U-Boot
• Customizing the Linux kernel
• Update packages in Debian
• Running X11 application on Wayland
• Replace the Linux logo
• Booting from USB using UUU (Universal Update Utility)

How-to

Test and use an Interface

• Audio
• Backlight
• Bluetooth
• Bluetooth A2DP
• Bluetooth file transfer
• Bluetooth Low Energy

• OV5640 Camera
• CAN bus
• CPU freq. and number of cores
• Display
• Ethernet
• GPIO
• I2C
• RTC
• SPI
• Static IP address
• Suspend
• UART
• USB Host
• USB OTG
• User Button
• Video streaming - Playback/Capture
• Watchdog
• WiFi

Notes:

• In any "How-to" steps where manual steps to be executed on the target are mentioned, either the serial port or via ssh.
• If a certain interface require changes in the kernel code, then after those changes are done the kernel image and device tree dtbs needs to be rebuilt and flashed on the SOM.

To the top