DART-6UL Yocto

DART-6UL Yocto

Yocto project is a framework for creating a Linux distributions for embedded devices. Its layering mechanism makes it easy to add Linux to new target devices highly customized for a particular platform; it can include custom start-up scripts, software packages built with a high degree of optimization for a particular architecture, and different user interfaces from full Gnome desktop to a simple a serial console. This release is based on Freescale/NXP Community BSP layer for Yocto framework. Variscite extends this layer to support its i.MX6 System On Module products: VAR-SOM-MX6, VAR-SOM-SOLO/DUAL and DART-MX6 (all of which are under the VAR-SOM-MX6 category of this Wiki).

General

General

• First Time? Start Here <---
• Support forum
• Using the recovery SD card

Programming

• Hello World 'C' application
• Building A QT Hello World
• Debugging with Eclipse
• TFTP & NFS

Build

Build Yocto, Linux and U-Boot

• Release Notes
• Setting a Development Environment
• Build Yocto from source code
• Yocto common build errors
• Toolchain installation for out of Yocto builds
• Build the Linux kernel from source code
• Build U-Boot from source code
• Customizing the Linux kernel and U-Boot
• Burning Yocto binaries to NAND flash/eMMC via SD card
• Burning Yocto binaries to NAND flash/eMMC via Ethernet
• Burning Yocto binaries to NAND flash from U-Boot
• U-Boot features
• Adding packages to Yocto
• Replace the Linux logo

How-to

Test and use an Interface

• Audio record/play
• Backlight
• Bluetooth
• Bluetooth Low Energy
• Camera
• CAN bus
• Digital Mic
• Dual Displays: LVDS & HDMI
• Ethernet
• External UART
• GPIO
• HDMI
• I2C

• LVDS
• Parallel RGB Display on DART-MX6
• PCIE
• RTC
• SATA
• SPI
• Suspend
• USB Host
• USB OTG
• Video streaming - Playback/Capture
• Wireless LAN
• WiFi using connman

__NONUMBEREDHEADINGS__