DART-SD410 Start here

DART-SD410 - First Time? Start Here.

Read Documentations

Please download and read the development kit documentation. on Variscite website

NOTE:
Make sure you read the Quick Start Guide.

Setup Linux host PC Development Environment

Set up your development environment.

• Setting Development Environment

Step Three: DVK Power Up

Remove SD card from the Board. Power up the board.
You should have the serial cable connected to the debug port, as describe in the quick start guide
When board boots, make sure you see the boot process prints on your host PC hyper terminal. You will need to type-in commands in the command prompt late in the development stages

IMPORTANT:
Don't continue without the serial console operating.

IMPORTANT:
We suggest using Putty for this purpose.

Step Four: What next?

Your next step is compile the Androi project:

• Developers Guide. This guide will help you to build the Android project and create the working images.

Step Five: Test various interfaces

• Using user LED
• Using GPIO
• Using RTC
• Recording and Playing sound file
• Capturing screen snapshot
• Switching screen
• Capturing camera image
• Testing internet connection
• Rotating LVDS screen
• Measuring power consumption
• Reseting the system

Step Six: Contact Support

• Support forum
• support@variscite.com