DART-6UL B2QT
From Variscite Wiki
DART-6UL B2Qt Zeus
B2Qt project is a framework for creating a Linux distributions for embedded devices. It's layering mechanism makes it easy to add Linux to new target devices highly customized for a particular platform; it can include custom start-up scripts, software packages built with a high degree of optimization for a particular architecture, and different user interfaces from full Gnome desktop to a simple a serial console.
This release is based on Freescale/NXP Community BSP layer for Yocto framework. Variscite extends this layer to support its i.MX6 UL/ULL System On Module products: DART-6UL and DART-6UL-5G (all of which are under the DART-6UL category of this wiki).
Release version: zeus-b2qt-5.4.3-mx6ul-v1.1
General
- General
- Programming
- Support
- Variscite Customer Portal
Register at Variscite Customer Portal to get high quality engineering support for Variscite products - Variscite Support Forum
Build
- Build B2Qt, Linux and U-Boot
- Release Notes
- Setting a Development Environment
- Build B2Qt from source code
- B2Qt common build errors
- Customizing U-Boot
- Customizing the Linux kernel
- Toolchain installation for out of B2Qt builds
- Build U-Boot from source code
- Build the Linux kernel from source code
- Burning B2Qt binaries to NAND flash/eMMC via SD card
- Burning B2Qt binaries to NAND flash/eMMC via Ethernet
- Burning B2Qt binaries to NAND flash from U-Boot
- U-Boot features
- Adding packages to B2Qt
- Replace the Linux logo
- Secure Boot / High Assurance Boot (HAB)
- Booting from USB using the imx_usb_loader utility
How-to
- Test and use an interface
- 128MB DRAM
- ADC
- Audio record/play
- Backlight
- Bluetooth
- Bluetooth A2DP
- Bluetooth file transfer
- Bluetooth Low Energy
- Camera
- CAN bus
- CPU freq. and number of cores
- Display
- Ethernet
- Ethernet MAC addresses
- GPIO
- I2C
- RTC
- SPI
- Static IP address
- Suspend
- UART
- USB Host
- USB OTG
- User Button
- Wakeable GPIO
- Wireless LAN
- WiFi using connman
__NONUMBEREDHEADINGS__