MX8 Basler Camera
Introduction
The following instructions will help you to integrate Basler MIPI camera support into Variscite Yocto images for i.MX8M and i.MX8MM platforms. This will allow you to stream images from a Basler camera(s) connected to Variscite evaluation platforms. You can save the images to storage device and process them using the Basler pylon SDK and the pylonViewer app.
Download Variscite Yocto BSP
Please follow http://variwiki.com/index.php?title=Yocto_Build_Release&release=
Execute steps 1-4.3 to download the BSP sources, but don't start bitbake yet.
Download and install Basler meta layers
$ wget ftp://customerv:Variscite1@ftp.variscite.com/Basler/basler-dart-bcon-mipi-imx8-cep_1.1.2.tar.gz $ tar xf basler-dart-bcon-mipi-imx8-cep_1.1.2.tar.gz -C sources
Download and install Variscite kernel patches
$ wget ftp://customerv:Variscite1@ftp.variscite.com/Basler/sumo-fsl-4.14.98/recipes-kernel/linux.tar.gz $ mv sources/meta-variscite-imx/recipes-kernel/linux sources/meta-variscite-imx/recipes-kernel/linux.orig $ tar xf linux.tar.gz -C sources/meta-variscite-imx/recipes-kernel
Customize configuration files
Customize bblayers.conf
Add the following lines to conf/bblayers.conf
BBLAYERS += " ${BSPDIR}/sources/meta-basler-imx8 "
BBLAYERS += " ${BSPDIR}/sources/meta-basler-tools/meta-basler-common "
Customize local.conf
Add the following lines to conf/local.conf to add Basler software and driver
IMAGE_INSTALL_append = " \
basler-camera-driver \
pylon \
python3-pypylon \
gentl-producer \
"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-basler-camera-driver"
Add the following lines to add Basler DTB files
KERNEL_DEVICETREE_append_imx8mq-var-dart = " \
freescale/fsl-imx8mq-var-dart-sd-hdmi-basler-camera.dtb \
freescale/fsl-imx8mq-var-dart-sd-lvds-basler-camera.dtb \
freescale/fsl-imx8mq-var-dart-sd-lvds-dp-basler-camera.dtb \
freescale/fsl-imx8mq-var-dart-sd-lvds-hdmi-basler-camera.dtb \
freescale/fsl-imx8mq-var-dart-wifi-dp-basler-camera.dtb \
freescale/fsl-imx8mq-var-dart-wifi-hdmi-basler-camera.dtb \
freescale/fsl-imx8mq-var-dart-wifi-lvds-basler-camera.dtb \
freescale/fsl-imx8mq-var-dart-wifi-lvds-dp-basler-camera.dtb \
freescale/fsl-imx8mq-var-dart-wifi-lvds-hdmi-basler-camera.dtb \
"
Build Yocto image
Follow Variscite wiki to build and install Yocto image.
Running Basler camera application
Run the following commands at the shell prompt:
$ export DISPLAY=:0.0 $ GENICAM_GENTL64_PATH=/opt/dart-bcon-mipi/lib /opt/pylon6/bin/pylonviewer 2>/dev/null &