MX8 Basler Camera

From Variscite Wiki
DART-MX8M-MINI Basler Camera

1 Introduction

The following instructions will allow you to add support for the Basler MIPI camera to your Yocto images.
This will allow you to stream images/video from a Basler camera(s) connected to a Variscite evaluation kit.

2 Download Variscite Yocto BSP

Please follow Build Yocto from source code.
Execute steps 1-4.3 to download the BSP sources, but don't start bitbake yet.

3 Download and install Basler meta layers

$ wget ftp://customerv:Variscite1@ftp.variscite.com/Basler/Software/basler-dart-bcon-mipi-imx8-cep_1.5.0-for-imx-4.14.98-2.0.0_ga_sumo.tar.gz
$ mkdir basler-dart-bcon-mipi-imx8-cep_1.5.0-for-imx-4.14.98-2.0.0_ga_sumo
$ tar xf basler-dart-bcon-mipi-imx8-cep_1.5.0-for-imx-4.14.98-2.0.0_ga_sumo.tar.gz -C basler-dart-bcon-mipi-imx8-cep_1.5.0-for-imx-4.14.98-2.0.0_ga_sumo
$ mv basler-dart-bcon-mipi-imx8-cep_1.5.0-for-imx-4.14.98-2.0.0_ga_sumo/meta-basler* ../sources

4 Download and install Variscite kernel patches

$ wget ftp://customerv:Variscite1@ftp.variscite.com/Basler/Software/sumo-fsl-4.14.98-cep-1.5.0/meta-variscite-imx-basler.tar.gz
$ tar xf meta-variscite-imx-basler.tar.gz -C ../sources/

5 Customize configuration files

5.1 Customize bblayers.conf

Add the following lines to conf/bblayers.conf

BBLAYERS += " ${BSPDIR}/sources/meta-basler-imx8 "
BBLAYERS += " ${BSPDIR}/sources/meta-basler-tools/meta-basler-common "
BBLAYERS += " ${BSPDIR}/sources/meta-variscite-imx-basler "

5.2 Customize local.conf

Add the following to conf/local.conf under your Yocto build directory:

Add Basler software and driver:

IMAGE_INSTALL_append = " \
        basler-camera-driver \
        pylon \
        python3-pypylon \
        gentl-producer \
        xauth \
"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-basler-camera-driver"

6 Build Yocto image

Continue following Build Yocto from source code from where you left off, to bitbake and install an image.

7 Running Basler camera application

Run the following commands at the shell prompt:

$ export DISPLAY=:0.0
$ /usr/bin/pylon


8 Prebuilt recovery SD card image

A prebuilt recovery SD card image with Basler camera support can be downloaded from:
ftp://customerv:Variscite1@ftp.variscite.com/Basler/Software/DART-MX8M-MINI/sumo-fsl-4.14.98-mx8mm-v2.5/

Note: Some web browsers have removed FTP support. Please see our FTP wiki page.