VAR-SOM-MX6 Yocto Krogoth: Difference between revisions

Revision as of 10:31, 14 September 2017

VAR-SOM-MX6 Yocto Krogoth

Yocto project is a framework for creating a Linux distributions for embedded devices. Its layering mechanism makes it easy to add Linux to new target devices highly customized for a particular platform; it can include custom start-up scripts, software packages built with a high degree of optimization for a particular architecture, and different user interfaces from full Gnome desktop to a simple a serial console.

Freescale/NXP i.MX joined the Yocto Project community providing a release based on the Yocto Project framework. Variscite extends this framework to support its i.MX6 System On Module products: VAR-SOM-MX6, VAR-SOM-SOLO/DUAL and DART-MX6 (all of which are under the VAR-SOM-MX6 category of this Wiki).

General

Programming

Build

Build Yocto, Linux and U-Boot

How-to

Test and use an Interface

__NONUMBEREDHEADINGS__

@@ Line 34: / Line 34: @@
 * [[VAR-SOM-MX6 Yocto Krogoth Build Yocto release|'''Build Yocto from source code''']]
 * [[VAR-SOM-MX6_Yocto Common Errors|Yocto common build errors</span>]]
+* [[VAR-SOM-MX6 Yocto Krogoth Customizing kernel and uboot|Customizing the Linux kernel and U-Boot]]
 * [[VAR-SOM-MX6 Toolchain installation for out of Yocto Krogoth builds|Toolchain installation for out of Yocto builds]]
+* [[VAR-SOM-MX6 Yocto Krogoth Build U-Boot out of tree|Build U-Boot from source code]]
 * [[VAR-SOM-MX6 Yocto Krogoth Build Linux out of tree|Build the Linux kernel from source code]]
-* [[VAR-SOM-MX6 Yocto Krogoth Build U-Boot out of tree|Build U-Boot from source code]]
-* [[VAR-SOM-MX6 Yocto Krogoth Customizing kernel and uboot|Customizing the Linux kernel and U-Boot]]
 * [[VAR-SOM-MX6 NAND Flash Burning Jethro|Install Yocto binaries to NAND flash/eMMC via SD card]]
 * [[VAR-SOM-MX6 Yocto Flash From Net|Install Yocto binaries to NAND flash/eMMC via Ethernet]]