DART-6UL Yocto: Difference between revisions
No edit summary |
No edit summary |
||
Line 75: | Line 75: | ||
* [[CPU freq and num of cores|CPU freq. and number of cores]] | * [[CPU freq and num of cores|CPU freq. and number of cores]] | ||
* [[DART-6UL/VAR-SOM-MX7 Display|Display]] | * [[DART-6UL/VAR-SOM-MX7 Display|Display]] | ||
* {{Varlink|{{#var:HARDWARE_NAME}} Ethernet|{{#var: | * {{Varlink|{{#var:HARDWARE_NAME}} Ethernet|{{#var:RrtELEASE_LINK}}|Ethernet}} | ||
* [[{{#var:HARDWARE_NAME}} Eth MAC address|Ethernet MAC addresses]] | * [[{{#var:HARDWARE_NAME}} Eth MAC address|Ethernet MAC addresses]] | ||
* [[{{#var:HARDWARE_NAME}} GPIO|GPIO]] | * [[{{#var:HARDWARE_NAME}} GPIO|GPIO]] | ||
* [[{{#var:HARDWARE_NAME}} I2C|I2C]] | * [[{{#var:HARDWARE_NAME}} I2C|I2C]] | ||
* | * {{Varlink|IMX RTC|{{#var:RELEASE_LINK}}|RTC}} | ||
* [[{{#var:HARDWARE_NAME}} SPI|SPI]] | * [[{{#var:HARDWARE_NAME}} SPI|SPI]] | ||
* [[Static_IP_Address |Static IP address]] | * [[Static_IP_Address |Static IP address]] |
Revision as of 16:49, 28 March 2021
Yocto project is a framework for creating a Linux distributions for embedded devices. It's layering mechanism makes it easy to add Linux to new target devices highly customized for a particular platform; it can include custom start-up scripts, software packages built with a high degree of optimization for a particular architecture, and different user interfaces from full Gnome desktop to a simple a serial console.
This release is based on Freescale/NXP Community BSP layer for Yocto framework. Variscite extends this layer to support its i.MX6 UL/ULL/ULZ System On Module products: DART-6UL, DART-6UL-5G and VAR-SOM-6UL (all of which are under the DART-6UL category of this wiki).
Release version: thud-fslc-4.14.78-mx6ul-v1.1
- General
- Programming
- Support
- Variscite Customer Portal
Register at Variscite Customer Portal to get high quality engineering support for Variscite products - Variscite Support Forum
- Build Yocto, Linux and U-Boot
- Release Notes
- Setting a Development Environment
- Build Yocto from source code
- Yocto common build errors
- Customizing U-Boot
- Customizing the Linux kernel
- Toolchain installation for out of Yocto builds
- Build U-Boot from source code
- Build the Linux kernel from source code
- Burning Yocto binaries to NAND flash/eMMC via SD card
- Burning Yocto binaries to NAND flash/eMMC via Ethernet
- Burning Yocto binaries to NAND flash from U-Boot
- U-Boot features
- Adding packages to Yocto
- Replace the Linux logo
- Secure Boot / High Assurance Boot (HAB)
- SWUpdate Guide
- Booting from USB using the imx_usb_loader utility
- Docker Guide
- Test and use an interface
- 128MB DRAM
- ADC
- Audio record/play
- Backlight
- Bluetooth
- Bluetooth A2DP
- Bluetooth file transfer
- Bluetooth Low Energy
- Camera
- CAN bus
- CPU freq. and number of cores
- Display
- Ethernet
- Ethernet MAC addresses
- GPIO
- I2C
- RTC
- SPI
- Static IP address
- Suspend
- UART
- USB Host
- USB OTG
- User Button
- Wakeable GPIO
- Wireless LAN
- WiFi using connman
__NONUMBEREDHEADINGS__