DART-6UL Yocto Jethro R1

DART-6UL Yocto Jethro R1

Yocto project is a framework for creating Linux distributions for embedded devices. Its layering mechanism makes it easy to add Linux to new target devices highly customized for a particular platform; it can include custom start-up scripts, software packages built with a high degree of optimization for a particular architecture, and different user interfaces from full Gnome desktop to a simple a serial console. Freescale i.MX joined the Yocto Project community providing a release based on the Yocto Project framework. Variscite extend this framework to support our i.MX6 System On a Modules. Release version: imx_4.1.15_ga-var01

General

General

• First Time? Start Here <---
• Support forum
• Using the recovery SD card

Programming

• Hello World 'C' application
• Building A QT Hello World
• Debugging with Eclipse
• TFTP & NFS

Build

Build Yocto, Linux and U-Boot

• Release Notes
• Supported hardware and features
• Settings Development Environment
• Build Yocto from source code
• Yocto common build errors
• Build Linux kernel from source code
• Build U-Boot from source code
• Customizing kernel and U-Boot
• Burning Yocto binaries to NAND Flash via SD-Card
• Burning Yocto binaries to NAND Flash via Ethernet TFTP
• Adding packages to Yocto

Howto

HOW-TO Test and use an Interface

• GPIO
• Ethernet
• Audio record/play
• CAN bus
• USB Host
• RTC
• LVDS
• ADC
• User Button
• Wakeable GPIO

• I2C
• Wireless LAN
• Bluetooth
• Backlight
• USB OTG as host
• USB OTG as device
• SPI
• External UART
• Sleep Mode Standby

__NONUMBEREDHEADINGS__