DART-SD410 Start here: Difference between revisions
From Variscite Wiki
| Line 36: | Line 36: | ||
*[[DART-SD410_Android_Measuring_power_consumption|Measuring power consumption]] | *[[DART-SD410_Android_Measuring_power_consumption|Measuring power consumption]] | ||
*[[DART-SD410_Android_Reseting_the_system|Reseting the system]] | *[[DART-SD410_Android_Reseting_the_system|Reseting the system]] | ||
*[[DART-SD410_Android_Setting_ADB_over Wi-Fi|Setting Adb Over Wi-Fi]] | |||
Revision as of 14:09, 17 April 2016
DART-SD410 - First Time? Start Here.
Read Documentations
Please download and read the development kit documentation. on Variscite website
NOTE:
Make sure you read the Quick Start Guide.
Make sure you read the Quick Start Guide.
Contact Support
Please contact support to receive the FTP credentials
- support@variscite.com
Setup Linux host PC Development Environment
Set up your development environment.
DVK Power Up
Remove SD card from the Board.
Power up the board.
You should have the serial cable connected to the debug port, as describe in the quick start guide
When board boots, make sure you see the boot process prints on your host PC hyper terminal. You will need to type-in commands in the command prompt late in the development stages
IMPORTANT:
Don't continue without the serial console operating.
Don't continue without the serial console operating.
IMPORTANT:
We suggest using Putty for this purpose.
We suggest using Putty for this purpose.
What next?
Your next step is compile the Androi project:
- Developers Guide. This guide will help you to build the Android project and create the working images.