Debian Recovery SD card: Difference between revisions
| Line 22: | Line 22: | ||
$ gunzip mx8mm-dart-debian-recovery-sd.vXX.img.gz | $ gunzip mx8mm-dart-debian-recovery-sd.vXX.img.gz | ||
$ sudo umount /dev/sdX* | $ sudo umount /dev/sdX* | ||
$ sudo dd if=mx8mm-dart-debian-recovery-sd.vXX.img of=/dev/sdX bs=1M; sync | $ sudo dd if=mx8mm-dart-debian-recovery-sd.vXX.img of=/dev/sdX bs=1M conv=fsync status=progress; sync | ||
(Replace /dev/sdX with your actual device) | (Replace /dev/sdX with your actual device) | ||
| Line 55: | Line 55: | ||
}} | }} | ||
}} | }} | ||
=== Using a Windows based host === | === Using a Windows based host === | ||
Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/, install and run it.<br> | Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/, install and run it.<br> | ||
Revision as of 18:16, 13 December 2022
Variscite provides a recovery SD card image that can be used to install the pre-built Debian images into the internal storage device of the SOM.
Download the recovery SD card image
Download stretch-4.14.78-mx8m-v1.0.img.gz
from Variscite's FTP server: ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/debian/
Note: Some web browsers have removed FTP support. Please see our FTP wiki page.
Write the image to an SD card
Using a Linux based host
Plug-in the SD card to your Linux HOST PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)
$ gunzip mx8m-dart-debian-recovery-sd.vXX.img.gz $ sudo umount /dev/sdX* $ sudo dd if=mx8m-dart-debian-recovery-sd.vXX.img of=/dev/sdX bs=1M; sync (Replace /dev/sdX with your actual device)
Using a Windows based host
Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/, install and run it.
Select the image file, and the SD card device - double check that the device is correct to avoid accidentally overwriting a different device.
Click on "Write".
No need to format the SD card before writing the image to it.
Recover NAND flash/eMMC
- Power-off the board.
- Insert the SD card into the SD card slot of the carrier board (DVK)
- Make sure the Boot DIP switches are set to SD card: Setting the Boot Mode
- Power up the board - it will boot into Linux from the SD card
Flash from command line
- Login as root (password root)
- From Linux command line, type the following
$ install_debian.sh - Flash Debian into eMMC
SD card image file tree
/opt/images/
└── Debian
├── rootfs.tar.gz
└── imx-boot-sd.bin
The install_debian.sh script file is located at /usr/sbin/