VAR-SOM-MX6 B2QT: Difference between revisions
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
* {{Varlink|Yocto Recovery SD card|{{#var:RELEASE_LINK}}|'''Using the recovery SD card'''}} | * {{Varlink|Yocto Recovery SD card|{{#var:RELEASE_LINK}}|'''Using the recovery SD card'''}} | ||
;Programming | ;Programming | ||
* {{Varlink|Yocto QT Hello World|{{#var:RELEASE_LINK}}|Building a Qt Hello World}} | * {{Varlink|Yocto QT Hello World|{{#var:RELEASE_LINK}}|Building a Qt Hello World}} | ||
* {{Varlink|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}|TFTP & NFS}} | * {{Varlink|Yocto Setup TFTP/NFS|{{#var:RELEASE_LINK}}|TFTP & NFS}} | ||
;Support | ;Support | ||
Revision as of 10:12, 29 March 2021
B2Qt project is a framework for creating a Linux distributions for embedded devices. Its layering mechanism makes it easy to add Linux to new target devices highly customized for a particular platform; it can include custom start-up scripts, software packages built with a high degree of optimization for a particular architecture, and different user interfaces from full Gnome desktop to a simple a serial console. Freescale/NXP i.MX joined the Yocto Project community providing a release based on the Yocto Project framework.
Variscite extends this layer to support its i.MX6 System On Module products: VAR-SOM-MX6, VAR-SOM-SOLO/DUAL and DART-MX6 (all of which are under the VAR-SOM-MX6 category of this wiki).
Release version: morty-b2qt-4.1.15-mx6-v1.0
- General
- Programming
- Support
- Variscite Customer Portal
Register at Variscite Customer Portal to get high quality engineering support for Variscite products - Variscite Support Forum
- Build B2Qt, Linux and U-Boot
- Release Notes
- Setting a Development Environment
- Build B2Qt from source code
- B2Qt common build errors
- Customizing U-Boot
- Customizing the Linux kernel
- Toolchain installation for out of B2Qt builds
- Build U-Boot from source code
- Build the Linux kernel from source code
- Burning B2Qt binaries to NAND flash/eMMC via SD card
- Burning B2Qt binaries to NAND flash/eMMC via Ethernet
- Burning B2Qt binaries to NAND flash from U-Boot
- U-Boot features
- Adding packages to B2Qt
- Replace the Linux logo
- Secure Boot / High Assurance Boot (HAB)
- Booting from USB using the imx_usb_loader utility
- Test and use an Interface
- Audio record/play
- Backlight
- Bluetooth
- Bluetooth A2DP
- Bluetooth file transfer
- Bluetooth Low Energy
- Camera
- CAN bus
- CPU freq. and number of cores
- Digital Mic
- Dual Displays: LVDS & HDMI
- Ethernet
- Ethernet MAC address
- External UART
- GPIO
- HDMI
- I2C
- LVDS
- Parallel RGB display on DART-MX6
- PCIE
- RTC
- SATA
- SPI
- Static IP address
- Suspend
- USB Host
- USB OTG
- Video streaming - Playback/Capture
- Wireless LAN
- WiFi using connman
__NONUMBEREDHEADINGS__