Yocto Build U-Boot: Difference between revisions
From Variscite Wiki
No edit summary |
No edit summary |
||
(15 intermediate revisions by 3 users not shown) | |||
Line 26: | Line 26: | ||
Build U-Boot: | Build U-Boot: | ||
$ make - | $ make -j$(nproc) | ||
| | | | ||
Select one of the following configurations: | Select one of the following configurations: | ||
Line 38: | Line 38: | ||
Build U-Boot: | Build U-Boot: | ||
$ make - | $ make -j$(nproc) | ||
}} | }} | ||
Line 52: | Line 52: | ||
Obtain SC firmware:<br> | Obtain SC firmware:<br> | ||
Either build | {{#ifexpr: {{#var:YOCTO_VERSION}} < 3.1 |Either build|Build}} SCFW by following the {{Varlink|Yocto_Build_SCFW|{{#var:RELEASE_LINK}}|Build SCFW from source code}} page and copy the SCFW image to the imx-boot-tools directory{{#ifexpr: {{#var:YOCTO_VERSION}} < 3.1 |, or download the pre-built binary by running:<br> | ||
$ wget {{#var:META_VARISCITE_GIT}}/raw/{{#var:META_VARISCITE_BRANCH}}/recipes-bsp/imx-sc-firmware/imx-sc-firmware/{{#var:SC_FIRMWARE}} -O scfw_tcm.bin | $ wget {{#var:META_VARISCITE_GIT}}/raw/{{#var:META_VARISCITE_BRANCH}}/recipes-bsp/imx-sc-firmware/imx-sc-firmware/{{#var:SC_FIRMWARE}} -O scfw_tcm.bin| | ||
.<br><br>}} | |||
{{#ifexpr: {{#rpos: {{#var:NXP_FIRMWARE}} | firmware-imx-8.1.1}} >= 0 | |||
| <!-- SECO is in NXP_FIRMWARE for original Sumo release --> | |||
Download SECO firmware: | Download SECO firmware: | ||
$ wget {{#var:NXP_FIRMWARE_URL}}/{{#var:NXP_FIRMWARE}}.bin | $ wget {{#var:NXP_FIRMWARE_URL}}/{{#var:NXP_FIRMWARE}}.bin | ||
$ chmod +x {{#var:NXP_FIRMWARE}}.bin | $ chmod +x {{#var:NXP_FIRMWARE}}.bin | ||
$ ./{{#var:NXP_FIRMWARE}}.bin | $ ./{{#var:NXP_FIRMWARE}}.bin | ||
$ cp {{#var:NXP_FIRMWARE}}/firmware/seco/{{#var:SECO_FIRMWARE}} . | $ cp {{#var:NXP_FIRMWARE}}/firmware/seco/{{#var:SECO_FIRMWARE}} . | ||
| <!-- SECO is in SECO_FIRMWARE for other releases --> | |||
Download SECO firmware: | |||
$ wget {{#var:SECO_FIRMWARE_URL}}/{{#var:SECO_FIRMWARE}}.bin | |||
$ chmod +x {{#var:SECO_FIRMWARE}}.bin | |||
$ ./{{#var:SECO_FIRMWARE}}.bin | |||
$ cp {{#var:SECO_FIRMWARE}}/firmware/seco/mx8q*-ahab-container.img . | |||
}} | }} | ||
| | | | ||
Line 101: | Line 95: | ||
Use VARISCITE_ATF_GIT from yocto platform customization if exists for Variscite hosted repo, else default to NXP: | Use VARISCITE_ATF_GIT from yocto platform customization if exists for Variscite hosted repo, else default to NXP: | ||
--> | --> | ||
$ git clone {{#var:VARISCITE_ATF_GIT | {{#var:NXP_IMX_GIT}}/imx-atf }} -b {{#var:VARISCITE_ATF_BRANCH | {{#var:NXP_IMX_BRANCH}}}} | $ git clone {{#var:VARISCITE_ATF_GIT | {{#var:NXP_IMX_GIT}}/imx-atf}} -b {{#var:VARISCITE_ATF_BRANCH | {{#var:NXP_IMX_BRANCH}}}} | ||
{{#ifeq: {{#var:SOC_FAMILY}}|imx8m| | {{#ifeq: {{#var:SOC_FAMILY}}|imx8m| | ||
$ git clone {{#var:META_VARISCITE_GIT}} -b {{#var:META_VARISCITE_BRANCH}} | $ git clone {{#var:META_VARISCITE_GIT}} -b {{#var:META_VARISCITE_BRANCH}} | ||
Line 107: | Line 101: | ||
{{#if: {{#var:IMX_MKIMAGE_SOC_PATCH}}| | {{#if: {{#var:IMX_MKIMAGE_SOC_PATCH}}| | ||
$ cd imx-mkimage | $ cd imx-mkimage | ||
$ git apply ../{{#var:META_VARISCITE_REPO}}/{{#var:IMX_MKIMAGE_SOC_PATCH}} | $ git apply ../{{#var:META_VARISCITE_REPO}}/{{#var:IMX_MKIMAGE_SOC_PATCH}}<!-- | ||
-->{{#varexists:IMX_MKIMAGE_SOC_PATCH_1 | | |||
<br>$ git apply ../{{#var:META_VARISCITE_REPO}}/{{#var:IMX_MKIMAGE_SOC_PATCH_1}} | |||
}}<!-- | |||
-->{{#varexists:IMX_MKIMAGE_SOC_PATCH_2 | | |||
<br>$ git apply ../{{#var:META_VARISCITE_REPO}}/{{#var:IMX_MKIMAGE_SOC_PATCH_2}} | |||
}} | |||
$ cp iMX8M/soc.mak .. | $ cp iMX8M/soc.mak .. | ||
$ cd .. | $ cd .. | ||
| | | | ||
$ cp {{#var:META_VARISCITE_REPO}}/recipes-bsp/imx-mkimage/files/soc.mak . }} | $ cp {{#var:META_VARISCITE_REPO}}/recipes-bsp/imx-mkimage/files/soc.mak .}} | ||
}} | }} | ||
| | | | ||
Line 136: | Line 136: | ||
| | | | ||
{{#ifeq: {{#var:SOC}}|mx8mm| | {{#ifeq: {{#var:SOC}}|mx8mm| | ||
$ cp ../u-boot-nodtb.bin ../spl/u-boot-spl.bin ../arch/arm/dts/{{#var:U-BOOT_DTB_DART}} ../arch/arm/dts/{{#var:U-BOOT_DTB_SOM}} ../arch/arm/dts/{{#var:U-BOOT_DTB_SOM_10}} . | $ cp ../u-boot-nodtb.bin ../spl/u-boot-spl.bin ../arch/arm/dts/{{#var:U-BOOT_DTB_DART}} ../arch/arm/dts/{{#var:U-BOOT_DTB_SOM}} {{#varexists:U-BOOT_DTB_SOM_10 | ../arch/arm/dts/{{#var:U-BOOT_DTB_SOM_10}} |}} . | ||
| | | | ||
{{#ifeq: {{#var:SOC}}|mx8mn| | {{#ifeq: {{#var:SOC}}|mx8mn| | ||
$ cp ../u-boot-nodtb.bin ../spl/u-boot-spl.bin ../arch/arm/dts/{{#var:U-BOOT_DTB_SOM | $ cp ../u-boot-nodtb.bin ../spl/u-boot-spl.bin ../arch/arm/dts/{{#var:U-BOOT_DTB_SOM}} . | ||
| | | | ||
{{#ifeq: {{#var:SOC}}|mx8mp| | {{#ifeq: {{#var:SOC}}|mx8mp| | ||
Line 210: | Line 210: | ||
|<br> | |<br> | ||
$ sudo dd if={{#var:U-BOOT_IMAGE_NAME}} of=/dev/sdX bs=1K seek=1; sync | $ sudo dd if={{#var:U-BOOT_IMAGE_NAME}} of=/dev/sdX bs=1K seek=1; sync | ||
|<br> | |<br> | ||
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1; sync | $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1; sync | ||
$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69; sync | $ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69; sync | ||
}} | }} | ||
}} | }} | ||
(Replace /dev/sdX with the correct device) | |||
If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card: | If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card: | ||
{{#ifeq: {{#var:SPL_SD_IMAGE_NAME}} | N/A | {{#ifeq: {{#var:SPL_SD_IMAGE_NAME}} | N/A | ||
|<br> | |<br> | ||
$ sudo cp {{#var:U-BOOT_IMAGE_NAME}} /media/rootfs/opt/images/ | $ sudo cp {{#var:U-BOOT_IMAGE_NAME}} /media/rootfs/opt/images/… | ||
|<br> | |<br> | ||
$ sudo cp SPL /media/rootfs/opt/images/ | $ sudo cp SPL /media/rootfs/opt/images/… | ||
$ sudo cp u-boot.img /media/rootfs/opt/images/ | $ sudo cp u-boot.img /media/rootfs/opt/images/… | ||
}} | }} | ||
And eject the SD card gracefully from host machine. | And eject the SD card gracefully from host machine. |
Revision as of 20:02, 20 June 2022
Yocto Build U-Boot from source code
Toolchain installation for out of Yocto builds
To install the toolchain, follow Yocto Toolchain installation.
Build U-Boot out of Yocto tree
Obtain sources:
$ git clone https://github.com/varigit/uboot-imx.git -b imx_v2015.04_4.1.15_1.1.0_ga_var03 $ cd uboot-imx
Configure compilation environment:
$ source /opt/fslc-x11/2.2.1/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi
Cleanup everything:
$ make mrproper
Select one of the following configurations:
For booting from SD card/eMMC: $ make mx6var_som_sd_defconfig For booting from NAND flash: $ make mx6var_som_nand_defconfig
Build U-Boot:
$ make -j$(nproc)
Install the built U-Boot on an SD card
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1; sync $ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69; sync (Replace /dev/sdX with the correct device)
If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card:
$ sudo cp SPL /media/rootfs/opt/images/… $ sudo cp u-boot.img /media/rootfs/opt/images/…
And eject the SD card gracefully from host machine.
Note: If you manually upgrade an existing U-Boot, and you have an old environment saved, it is a good idea to reset your environment to the new default (see Environment handling commands)
Update your U-Boot out of Yocto tree
$ git pull