VAR-SOM-MX8 Release Notes

From Variscite Wiki

VAR-SOM-MX8 / SPEAR-MX8 Release Notes

Android 11.0.0_1.0.0-var-som-mx8_v1.3

Release Notes

Based on release Google: android-11.0.0_r4 NXP BSP: Android 11.0.0_1.0.0
Release tag mx8-android-11.0.0_1.0.0-v1.3
Release date 06/24/2022
Supported platforms VAR-SOM-MX8 / SPEAR-MX8
SOM revision VAR-SOM-MX8 / SPEAR-MX8 v1.1 and higher
NXP BSP FTP imx-android-11.0.0_1.0.0.tar.gz
Variscite BSP git
Variscite BSP branch android-11.0.0_1.0.0-var01
Kernel git
Kernel branch android-11.0.0_1.0.0-var01
U-Boot git
U-Boot branch imx_v2020.04_5.4.47_2.2.0_var01
File System build system Android
Recovery SD card link mx8__yocto-kirkstone-5.15-2.0.x-v1.1__android-11.0.0_1.0.0-v1.3.img.gz

Note: Some web browsers have removed FTP support. Please see our FTP wiki page or download using the command line:

$ wget 

After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List Description
Release 1.3
U-Boot: fec2: aligned to fec1 for consistency
U-Boot: fec1: tune phy-reset-post-delay
U-Boot: fec: add 20ms phy-reset-post-delay
Linux: ethphy1: remove no need rx-internal-delay-ps property
Linux: fec: add phy-reset-post-delay
Linux: ptn5150: enable irq-is-id-quirk irq-is-id-quirk allows the id pin to be used as an interrupt to avoid using a separate device tree file for Symphony <= 1.4.
Release 1.2
Linux: Enabled driver for ADIN1300 PHY
Linux: Added RGMII RX Clock Delay for Symphony-Board Ethernet port
Release 1.1
U-Boot: Introduce support for the i.MX8QP SoC
Linux: Introduce support for the i.MX8QP SoC
Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 Previously, internal pulldowns were enabled
P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frameAPI
Release 1.0
Android 11.0.0_1.0.0 (kernel 5.4.47) for VAR-SOM-MX8 and SPEAR-MX8
Known Issues
WiFi hotspot SSID broadcast not working reliably It is a known issue also on NXP's EVK
DisplayPort suspend/resume issue Link training fails for DP upon resume from suspend
USB Type-A ports are not supported in U-Boot on SPEAR-MX8 U-Boot USB driver does not recognize USB devices behind the hub