VAR-SOM-MX8X Release Notes
From Variscite Wiki
VAR-SOM-MX8X
Release Notes
Android 11.0.0_1.0.0-var-som-mx8x_v1.1
Release Notes
Based on release | Google: android-11.0.0_r4 NXP BSP: Android 11.0.0_1.0.0 |
Release tag | mx8x-android-11.0.0_1.0.0-v1.1 |
Release date | 05/12/2022 |
Supported platforms | VAR-SOM-MX8X |
SOM revision | v1.1 and higher (B0/C0) |
NXP BSP FTP | imx-android-11.0.0_1.0.0.tar.gz |
Variscite BSP git | https://github.com/varigit/MX6x-android |
Variscite BSP branch | android-11.0.0_1.0.0-var01 |
Kernel git | https://github.com/varigit/linux-imx |
Kernel branch | android-11.0.0_1.0.0-var01 |
U-Boot git | https://github.com/varigit/uboot-imx |
U-Boot branch | imx_v2020.04_5.4.47_2.2.0_var01 |
File System build system | Android |
Recovery SD card link | mx8x__yocto-kirkstone-5.15-2.0.x-v1.1__android-11.0.0_1.0.0-v1.1.img.gz |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Note: Variscite is no longer providing new recovery SD card images for the i.MX8X B0 silicon. Please refer to the Android developer guide for instructions about how to build an image for the B0 silicon.
Change Log
Change List | Description |
---|---|
Release 1.1 | |
Kernel | |
Enable ADIN PHY support | |
Add adi,phy-mode-override property | This is useful when a single device tree supports an adin PHY |
Add phy-reset delays to fec1 | |
Configure symphony adi,phy-mode-overide to rgmii | |
U-Boot | |
Enable RX clock delay for symphony ar8033 | This patch aligns the configuration with the kernel |
Add phy-reset-duration property to fec1 | |
Add support for Analog Devices ADIN1300 PHY | Allow 20ms delay for PHY to recover from hard reset |
Release 1.0 | |
Android 11.0.0_1.0.0 (kernel 5.4.47) for VAR-SOM-MX8X | |
Known Issues | |
WiFi hotspot SSID broadcast not working reliably | It is a known issue also on NXP's EVK |