DART-MX8M rev changelog

From Variscite Wiki

1 DART-MX8M changelog

1.1 DART-MX8M V1.4

1.1.1 Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer Old MPN New Manufacturer New MPN
Qualcomm AR8033-AL1A-R /
AR8033-AL1B-R
Analog Devices Inc ADIN1300BCPZ

1.1.2 Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release U-Boot Kernel
Yocto Dunfell / Debian Bullseye / Boot2Qt Dunfell (kernel 5.4.142) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8mq_var_dart: fec: add phy-reset-post-delay
1) imx8mq-var-dart: fec: add phy-reset-post-delay
2) imx8mq_var_dart_defconfig: enable driver for ADIN PHY
Yocto Zeus (kernel 5.4.24) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8mq_var_dart: fec: add phy-reset-post-delay
1) imx8mq-var-dart: fec: add phy-reset-post-delay
2) imx8mq_var_dart_defconfig: enable driver for ADIN PHY
Yocto Warrior / Debian Buster (kernel 4.19.35) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8mq_var_dart: fec: add phy-reset-post-delay
1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mq-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Sumo / Boot2Qt Sumo (kernel 4.14.98) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8mq_var_dart: fec: add phy-reset-post-delay
1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mq-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Sumo (kernel 4.14.78) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2 imx8mq_var_dart: fec: add phy-reset-post-delay
1) net: fec: imx8mq: register ADIN1300 PHY fixup to configure rgmii
2) imx8mq-var-dart: fec: add 20ms phy-reset-post-delay
Android 11.0.0_1.0.0 (kernel 5.4.47) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8mq_var_dart: fec: add phy-reset-post-delay
1) imx8mq-var-dart: fec: add phy-reset-post-delay
2) imx8_var_android_defconfig: enable driver for ADIN PHY
Android 10.0.0_2.3.0 (kernel 5.4.24) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8mq_var_dart: fec: add phy-reset-post-delay
1) imx8mq-var-dart: fec: add phy-reset-post-delay
2) imx8_var_android_defconfig: enable driver for ADIN PHY
Android 10.0.0_1.0.0 (kernel 4.19.42) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8mq_var_dart: fec: add phy-reset-post-delay
1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mq-var-dart: fec: add 20ms phy-reset-post-delay
Pie 9.0.0_2.0.0 (kernel 4.14.98) 1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8mq_var_dart: fec: add phy-reset-post-delay
1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mq-var-dart: fec: add 20ms phy-reset-post-delay
Note: These patches are backward-compatible with the previous SOM revisions.