DART-MX8M-PLUS Release Notes
From Variscite Wiki
DART-MX8M-PLUS
/ VAR-SOM-MX8M-PLUS Release Notes
Android 11.0.0_2.2.0-dart-mx8mp_v1.2
1 Release Notes
Based on release | Google: android-11.0.0_r36 NXP BSP: Android 11.0.0_2.2.0 |
Release tag | android-11.0.0_2.2.0-dart-mx8mp_v1.2 |
Release date | 04/04/2022 |
Supported platforms | DART-MX8M-PLUS / VAR-SOM-MX8M-PLUS |
SOM revision | v1.0 and higher |
Carrier board revision | v1.4 and higher |
NXP BSP FTP | imx-android-11.0.0_2.2.0.tar.gz |
Variscite BSP git | https://github.com/varigit/MX6x-android |
Variscite BSP branch | android-11.0.0_2.2.0-var01 |
Kernel git | https://github.com/varigit/linux-imx |
Kernel branch | android-11.0.0_2.2.0-var01 |
U-Boot git | https://github.com/varigit/uboot-imx |
U-Boot branch | lf_v2021.04_var01 |
Cortex M4 U-Boot support | MCUXPRESSO_2.9.0_V1.0_DART-MX8M-PLUS |
Cortex M4 Linux remoteproc support | MCUXPRESSO_2.9.0_V1.0_DART-MX8M-PLUS |
File System build system | Android |
Recovery SD card link | dart-mx8mp-recovery-sd.v74.img.gz |
Note: Some web browsers have removed FTP support. Please see our FTP wiki page or download using the command line:
$ wget ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-PLUS/Software/dart-mx8mp-recovery-sd.v74.img.gz
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
2 Change Log
Change List | Description |
---|---|
Release 1.2 | |
U-Boot Updates | |
Read carrier_rev from EEPROM | |
Add support for ADIN1300 | |
Fix SOM PHY reset when using legacy DT8MCustomBoard revisions | |
Set AR8033 VDDH_REG to 1.8V on Symphony-Board and DT8MCustomBoard | |
Linux Updates | |
imx8_var_defconfig: enable driver for ADIN PHY | ADIN1300 replaces AR8033 on DART-MX8M-PLUS 1.3, VAR-SOM-MX8M-PLUS 1.3, DT8MCustomBoard 3.0 and Symphony-Board 1.6 |
Release 1.1 | |
imx8mp-var-dart: Introduce support for pcal6408 | pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A |
gpio: pca953x: Introduce standard-regs-fallback property | |
gpio: pca953x: Introduce support for nxp,pcal6408 | |
Remap buttons | Home is mapped to Android Home screen, Up is mapped to Volume Up and Down is mapped to Volume Down |
Release 1.0 | |
Initial release based on NXP's android-11.0.0_2.2.0 for the i.MX8M Plus | |
Known Issues | |
WiFi hotspot SSID broadcast not working reliably | Known issue in this NXP Android release |