B2QT DART-MX8M-MINI

dart-mx8mm-b2qt-v1.0

• B2QT_BSP_VERSION = 5.12
• B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
• B2QT_BRANCH = sumo-var01
• HARDWARE_NAME = DART-MX8M-MINI
• MACHINE_NAME = imx8mm-var-dart
• RELEASE_NAME = b2qt-sumo-dart-mx8mm-v10
• RELEASE_LINK = RELEASE_SUMO_B2QT_V1.0_DART-MX8M-MINI
• RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v10.img.gz
• RECOVERY_SD_URL = https://variscite-public.nyc3.cdn.digitaloceanspaces.com/DART-MX8M-MINI/Software/b2qt
• SDCARD_IMG_EXT = wic
• YOCTO_NAME = Sumo
• YOCTO_VERSION = 2.5.3

dart-mx8mm-b2qt-v1.1

• B2QT_BSP_VERSION = 5.12
• B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
• B2QT_BRANCH = sumo-var01
• HARDWARE_NAME = DART-MX8M-MINI
• MACHINE_NAME = imx8mm-var-dart
• RELEASE_NAME = b2qt-sumo-dart-mx8mm-v11
• RELEASE_LINK = RELEASE_SUMO_B2QT_V1.1_DART-MX8M-MINI
• RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v11.img.gz
• RECOVERY_SD_URL = https://variscite-public.nyc3.cdn.digitaloceanspaces.com/DART-MX8M-MINI/Software/b2qt
• SDCARD_IMG_EXT = wic
• YOCTO_NAME = Sumo
• YOCTO_VERSION = 2.5.3

dart-mx8mm-b2qt-v1.2

• B2QT_BSP_VERSION = 5.12
• B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
• B2QT_BRANCH = sumo-var01
• BUILD_FOLDER = ~/var-b2qt
• BUILD_FOLDER_B2QT = build-imx8mm-var-dart
• BUILD_SCRIPT = . setup-environment.sh
• DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt5-image
• EMMC_ROOTFS_DEV = mmcblk2
• EMMC_ROOTFS_PARTITION_NUM = p1
• FSL_BSP_VERSION = L4.14.98-2.0.0_ga
• HARDWARE_NAME = DART-MX8M-MINI
• MACHINE_NAME = imx8mm-var-dart
• META_VARISCITE_REPO = meta-variscite-imx
• META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-imx
• META_VARISCITE_BRANCH = sumo-imx-4.14.98-var01
• RELEASE_NAME = b2qt-sumo-dart-mx8mm-v12
• RELEASE_LINK = RELEASE_SUMO_B2QT_V1.2_DART-MX8M-MINI
• RECOVERY_SD_NAME = b2qt-sumo-dart-mx8mm-v12.img.gz
• RECOVERY_SD_URL = https://variscite-public.nyc3.cdn.digitaloceanspaces.com/DART-MX8M-MINI/Software/b2qt
• RELEASE_TAG = b2qt_sumo_dart-mx8mm_v12
• IMX_ATF_PLAT = imx8mm
• IMX_MKIMAGE_SOC = iMX8MM
• NXP_IMX_GIT = https://github.com/nxp-imx
• NXP_IMX_BRANCH = imx_4.14.98_2.0.0_ga
• NXP_KERNEL_BRANCH = imx_4.14.98_2.0.0_ga
• NXP_KERNEL_GIT = https://github.com/nxp-imx/linux-imx
• NXP_FIRMWARE = firmware-imx-8.1.1
• NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
• SUPPORTED_REV_SOM = v1.1 and higher
• SUPPORTED_REV_CARRIER = v1.1 and higher
• B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
• QT_VERSION = 5.12.9 RC
• KERNEL_GIT = https://github.com/varigit/linux-imx
• KERNEL_BRANCH = imx_4.14.98_2.0.0_ga_var01
• KERNEL_DEFCONFIG = imx8_var_defconfig
• KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB
• KERNEL_IMAGE = Image.gz
• U-BOOT_GIT = https://github.com/varigit/uboot-imx
• U-BOOT_BRANCH = imx_v2018.03_4.14.98_2.0.0_ga_var01
• U-BOOT_BOARD_NAME = imx8mm_var_dart
• U-BOOT_DTB_DART = fsl-imx8mm-var-dart.dtb
• U-BOOT_DTB_SOM = fsl-imx8mm-var-som.dtb
• U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
• U-BOOT_OFFSET = 33
• U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
• U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
• U-BOOT_EMMC_DEV = 1
• U-BOOT_SD_DEV = 0
• U-BOOT_UMS_DEV = 0
• SDCARD_IMG_EXT = wic
• SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
• SOC = mx8mm
• SOC_SERIES = imx8
• SOC_FAMILY = imx8m
• SPL_SD_IMAGE_NAME = N/A
• TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt5-sdk-imx8mm-var-dart.sh
• TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/2.5.3
• TOOLCHAIN_LOCATION = /opt/b2qt/2.5.3/environment-setup-aarch64-poky-linux
• TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/x86_64-pokysdk-linux
• TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/2.5.3/sysroots/aarch64-poky-linux
• TOOLCHAIN_TYPE = aarch64-poky-linux
• YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
• YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS
• YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
• YOCTO_NAME = Sumo
• YOCTO_VERSION = 2.5.3

dunfell-b2qt-5.4-2.1.x-mx8mm-v1.0

• B2QT_BSP_VERSION = 6.0.3
• B2QT_GIT = https://github.com/varigit/meta-variscite-boot2qt.git
• B2QT_BRANCH = dunfell-var01
• BUILD_FOLDER = ~/var-b2qt
• BUILD_FOLDER_B2QT = build-imx8mm-var-dart
• BUILD_SCRIPT = . setup-environment.sh
• DEFAULT_IMAGE_BB_NAME = b2qt-embedded-qt6-image
• EMMC_ROOTFS_DEV = mmcblk2
• EMMC_ROOTFS_PARTITION_NUM = p1
• FSL_BSP_VERSION = 5.4.24_2.1.0
• HARDWARE_NAME = DART-MX8M-MINI
• MACHINE_NAME = imx8mm-var-dart
• META_VARISCITE_REPO = meta-variscite-fslc
• META_VARISCITE_GIT = https://github.com/varigit/meta-variscite-fslc
• META_VARISCITE_BRANCH = dunfell
• RELEASE_NAME = b2qt-dunfell-dart-mx8mm-v1.0
• RELEASE_LINK = RELEASE_DUNFELL_B2QT_V1.0_DART-MX8M-MINI
• RECOVERY_SD_NAME = b2qt-dunfell-dart-mx8mm-v1.0.img.gz
• RECOVERY_SD_URL = https://variscite-public.nyc3.cdn.digitaloceanspaces.com/DART-MX8M-MINI/Software/b2qt
• RELEASE_TAG = b2qt-dunfell-dart-mx8mm-v10
• IMX_ATF_PLAT = imx8mm
• IMX_MKIMAGE_SOC = iMX8MM
• NXP_IMX_GIT = https://github.com/nxp-imx
• NXP_IMX_BRANCH = imx_5.4.24_2.1.0
• NXP_KERNEL_BRANCH = 5.4-2.1.x-imx
• NXP_KERNEL_GIT = https://github.com/Freescale/linux-fslc
• NXP_FIRMWARE = firmware-imx-8.8
• NXP_FIRMWARE_URL = https://www.nxp.com/lgfiles/NMG/MAD/YOCTO
• SUPPORTED_REV_SOM = v1.1 and higher
• SUPPORTED_REV_CARRIER = v1.2c and higher
• B2QT_LINK = https://doc.qt.io/QtForDeviceCreation/
• QT_VERSION = 6.0.3
• KERNEL_GIT = https://github.com/varigit/linux-imx
• KERNEL_BRANCH = 5.4-2.1.x-imx_var01
• KERNEL_DEFCONFIG = imx8_var_defconfig
• KERNEL_DTB_SECTION = DART-MX8M-MINI_DTB_DUNFELL_V12
• KERNEL_IMAGE = Image.gz
• KERNEL_VER = 5.4.85
• KERNEL_RECIPE_VER = 5.4
• U-BOOT_GIT = https://github.com/varigit/uboot-imx
• U-BOOT_BRANCH = imx_v2020.04_5.4.24_2.1.0_var02
• U-BOOT_BOARD_NAME = imx8mm_var_dart
• U-BOOT_DTB_DART = imx8mm-var-dart-customboard.dtb
• U-BOOT_DTB_SOM = imx8mm-var-som-symphony.dtb
• U-BOOT_DTB_SOM_10 = fsl-imx8mm-var-som-rev10.dtb
• U-BOOT_OFFSET = 33
• U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
• U-BOOT_SD_IMAGE_NAME = imx-boot-sd.bin
• U-BOOT_EMMC_DEV = 2
• U-BOOT_SD_DEV = 1
• U-BOOT_UMS_DEV = 0
• SDCARD_IMG_EXT = wic
• SD_TREE_SECTION = DART-MX8M-MINI_SD_TREE
• SOC = mx8mm
• SOC_SERIES = imx8
• SOC_FAMILY = imx8m
• SPL_SD_IMAGE_NAME = N/A
• DEFAULT_TOOLCHAIN_BB_NAME = meta-toolchain-b2qt-embedded-qt6-sdk
• TOOLCHAIN_INSTALL_B2QT_NAME = b2qt-x86_64-meta-toolchain-b2qt-embedded-qt6-sdk-imx8mm-var-dart.sh
• TOOLCHAIN_ROOT_LOCATION = /opt/b2qt/3.1
• TOOLCHAIN_LOCATION = /opt/b2qt/3.1/environment-setup-aarch64-poky-linux
• TOOLCHAIN_HOST_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/x86_64-pokysdk-linux
• TOOLCHAIN_TARGET_SYSROOT_LOCATION = /opt/b2qt/3.1/sysroots/aarch64-poky-linux
• TOOLCHAIN_TYPE = aarch64-poky-linux
• YOCTO_BOOT_BOARD_SECTION = DART-MX8M-MINI_BOOT_BOARD
• YOCTO_BUILD_RESULTS_SECTION = DART-MX8M-MINI_BUILD_RESULTS_DUNFELL_V12
• YOCTO_FLASH_SD_FROM_GUI_SECTION = N/A
• YOCTO_NAME = Dunfell
• YOCTO_VERSION = 3.1
• IMX_MKIMAGE_SOC_PATCH = recipes-bsp/imx-mkimage/files/imx-mkimage-imx8m-soc.mak-add-variscite-imx8mm-suppo.patch
• FSLC_BSP_VERSION = 3.1
• VARISCITE_ATF_GIT = https://github.com/varigit/imx-atf
• VARISCITE_ATF_BRANCH = imx_5.4.24_2.1.0_var01
• DTB_PREFIX = imx8mm-var-dart-customboard
• DEFAULT_DTB_EMMC = imx8mm-var-dart-dt8mcustomboard.dtb
• DEFAULT_DTB_SD = imx8mm-var-dart-dt8mcustomboard.dtb
• DEFAULT_DTB = imx8mm-var-dart-dt8mcustomboard.dtb
• USE_KMSSINK = true