DART-MX8M-PLUS Release Notes
From Variscite Wiki
DART-MX8M-PLUS
/ VAR-SOM-MX8M-PLUS Release Notes
Yocto mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2
Release Notes
| Based on release | Yocto: Poky 4.0, BSP: FSLC 4.0, Linux: lf-5.15.y |
| Release tag | mx8mp-yocto-kirkstone-5.15-2.0.x-v1.2 |
| Release manifest | kirkstone-5.15.xml |
| Date | 01/01/2023 |
| Supported platforms | DART-MX8M-PLUS / VAR-SOM-MX8M-PLUS |
| SOM revision | v1.1 to v1.x |
| File System build system | Yocto Kirkstone |
| Recovery SD card link | mx8mp__yocto-kirkstone-5.15-2.0.x-v1.2__android-12.0.0_1.0.0-v1.2.img.gz |
| Cortex M7 U-Boot support | MCUXPRESSO_2.12.1_V1.0_DART-MX8M-PLUS |
| Cortex M7 Linux remoteproc support | MCUXPRESSO_2.12.1_V1.0_DART-MX8M-PLUS |
Relevant git Repositories
| Source | Repository | Branch | Commit ID |
|---|---|---|---|
| U-Boot | https://github.com/varigit/uboot-imx | lf_v2022.04_var01 | 458b2dbc7cc95fa52b8ba0729df2907509de581c |
| Kernel | https://github.com/varigit/linux-imx | 5.15-2.0.x-imx_var01 | 15e390fe9060862dfcf989782270bae54137452e |
| meta-variscite-bsp | https://github.com/varigit/meta-variscite-bsp | kirkstone | fa2757a53d2f9c3283c2de4d3142a51b1fa0e3ae |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
| Change List | Description |
|---|---|
| Release 1.2 | |
| U-Boot updates | |
| Remove eth1_phy_rst_hog on Carriers | This makes the PHY reset delays consistent with the values declared in the device tree file |
| Fix eth0 fail on legacy dt8mcustomboard | |
| Add vddio-regulator for AR8033 PHY on Carriers | This fixes Ethernet over Carrier not working in U-Boot with atheros PHY. |
| Kernel updates | |
| Disable phy for eth1 on legacy dt8mcustomboard | |
| Drop using "snps,reset-gpio" for DART-MX8M-PLUS | |
| net: mdio: manage deassert time when controlling MDIO reset signal | |
| net: fec: manage corner deferred probe condition | |
| net: mdio: force deassert MDIO reset signal | |
| Drop enabling multiple queues on eqos | This fixes the eth0 issue when stressed with iperf3 tests |
| enable pull-up for the ethernet phy reset on the SOMs | |
| arm64: imx8_var_defconfig: change usb ehci and ohci drivers to loadable | |
| Yocto updates | |
| meta-variscite-bsp updates | |
| linux-firmware: bc43xx: add symbolic link to firmware for each model | |
| linux-firmware: bc43xx: add symbolic link to firmware for each machine | |
| Revert "variscite-wifi.service: Disable service stop" | |
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 10.54.0.13" | |
| Release 1.1 | |
| U-Boot updates | |
| Reduce cma_size to 576m for 1gb soms | |
| Add an empty entry for OPTEE at MMU table | |
| Use PHYS_SDRAM_LOW_MAX_SIZE for lower bank size logic | |
| Kernel updates | |
| Add aliases for ecspi instances | |
| Add 20ms delay to ethernet regulator enable | |
| at803x: Save vddio regulator state during probe | |
| Fix PCI breaks on suspend | |
| Add start up delay for remoteproc | |
| Cortex-M7: Fix hanging SDMA examples | |
| Change sn65dsi83 to built in | |
| Yocto updates | |
| meta-variscite-bsp updates | |
| freertos-variscite: Add 2.12.x support | |
| Configure op-tee memory to 4gb | |
| Release 1.0 | |
| Initial Yocto Kirkstone release | Based on FSLC 5.15-2.0.x-imx (kernel 5.15.60) which is based on NXP lf-5.15.32-2.0.0 and merged with Linux Stable 5.15.60 |
| Known Issues | |
| DNS does not work after disabling dnsmasq and configuring NetworkManager DNS | Fixed by dnsmasq: enable dbus packageconfig |