DART-MX8M-PLUS Release Notes
From Variscite Wiki
DART-MX8M-PLUS
/ VAR-SOM-MX8M-PLUS Release Notes
Debian mx8mp-debian-bullseye-5.10.52_2.1.0-v1.2
Release Notes
| Based on release | Debian: Bullseye 11, Linux Kernel: NXP lf-5.10.y |
| Release git | https://github.com/varigit/debian-var |
| Release branch | debian_bullseye_var01 |
| Release tag | mx8mp-debian-bullseye-5.10.52_2.1.0-v1.2 |
| Date | 09/26/2023 |
| Supported platforms | DART-MX8M-PLUS / VAR-SOM-MX8M-PLUS |
| SOM revision | v1.0 and higher |
| Embedded Linux Distribution | Debian Bullseye |
| Cortex M7 U-Boot support | MCUXPRESSO_2.10.0_V1.0_DART-MX8M-PLUS |
| Cortex M7 Linux remoteproc support | MCUXPRESSO_2.10.0_V1.0_DART-MX8M-PLUS |
| Recovery SD card link | mx8mp-debian-bullseye-5.10.52_2.1.0-v1.2.img.gz
|
Relevant git Repositories
| Source | Repository | Branch | Commit ID |
|---|---|---|---|
| U-Boot | https://github.com/varigit/uboot-imx | lf_v2021.04_var02 | b932caa0bab1144407ae1d718c419dcef36d5797 |
| Kernel | https://github.com/varigit/linux-imx | lf-5.10.y_var03 | c5d770bdcc973a1c727cac17f142e483aef04b2b |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
| Change List | Description |
|---|---|
| Release 1.2 | |
| U-Boot | |
| lpddr4_timing: Align to RPA v7 + DDR Tool v3.3 | LPDDR4 timings have been updated |
| Linux | |
| Enable xcvr | Enable HDMI XCVR support |
| m7: enable sdma1 | Fix an issue with the Cortex-M7 SDMA examples |
| Debian | |
| Enable HDMI XCVR | |
| Fix PulseAudio system-wide mode installation | |
| Release 1.1 | |
| U-Boot | |
| imx8mp_var_dart: Fix carrier_rev environment variable | |
| imx8mp-var-dart: read carrier_rev from eeprom | |
| variscite: imx8_eeprom: fix unaligned access to eeprom crc | |
| variscite: imx8_eeprom: use CONFIG_IS_ENABLED macro for DM_I2C | |
| imx8_eeprom: replace carrier_rev magic number | |
| variscite: eth: ADIN1300: Disable RGMII RX clock delay | |
| imx8mp-var-dart: enable CONFIG_DM_ETH_PHY for ADIN1300 phy | |
| imx8mp-var-dart: disable carrier PHY on legacy dt8mcustomboard | |
| imx8mp-var-dart: fix som phy reset when using legacy dt8mcustomboard | |
| imx8mp-var-dart: set ar8033 VDDH_REG to 1.8v on symphony and dt8mcustomboard | |
| Linux | |
| imx8mp-var-dart: Update machine name | |
| brcmfmac: handle regrev for LWB5 for supported countries | |
| imx8_var_defconfig: enable driver for ADIN PHY | |
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support | |
| Release 1.0 | |
| Updated Cortex-M7 support | fixed freertos-variscite to generate distinct firmware files for SOM and DART |
| Updated kernel to lf-5.10.y_var03 branch | |
| Updated U-Boot to lf_v2021.04_var02 branch | |
| Updated gstreamer driver to MM_04.06.02_2108_L5.10.y | |
| Updated gst-plugin-base driver to MM_04.06.02_2108_L5.10.y | |
| Updated gst-plugin-good driver to MM_04.06.02_2108_L5.10.y | |
| Updated gst-plugin-bad driver to MM_04.06.02_2108_L5.10.y | |
| Updated gstreamer-imx driver to MM_04.06.02_2108_L5.10.y | |
| Updated imx-gpu-g2d driver to 6.4.3.p2.2 | |
| Updated imx-codec driver to 4.6.2 | |
| Updated imx-parser driver to 4.6.2 | |
| Updated imx-vpuwrap driver to 4.6.2 | |
| Updated imx-firmware to 8.13 | |
| Updated imx-nn driver to 1.2.0 | |
| Updated imx-vpu-hantro driver to 1.23.0 |