DART-MX8M Release Notes
From Variscite Wiki
DART-MX8M
Release Notes
Boot2Qt mx8m-b2qt-dunfell-5.4-2.1.x-v1.3
Release Notes
Based on release | B2Qt Dunfell, Poky 3.1, BSP: NXP 5.4.24_2.1.0, Linux: 5.4-2.1.x-imx |
Release git | https://github.com/varigit/meta-variscite-boot2qt |
Release tag | mx8m-b2qt-dunfell-5.4-2.1.x-v1.3 |
Release Branch | dunfell-var01 |
Date | 05/30/2022 |
Supported platforms | DART-MX8M |
SOM revision | v1.1 and higher |
Embedded Linux Distribution | B2Qt Community BSP Dunfell 3.1 based |
B2Qt Community BSP link | https://doc.qt.io/QtForDeviceCreation/ |
Qt version | 6.0.4 |
Kernel git | https://github.com/varigit/linux-imx |
Kernel branch | 5.4-2.1.x-imx_var01 |
U-Boot git | https://github.com/varigit/uboot-imx |
U-Boot branch | imx_v2020.04_5.4.24_2.1.0_var02 |
Cortex M4 U-Boot support | MCUXPRESSO_2.10.0_V1.0_DART-MX8M |
Cortex M4 Linux remoteproc support | MCUXPRESSO_2.10.0_V1.0_DART-MX8M |
File System build system | B2Qt Dunfell |
Recovery SD card link | mx8m-b2qt-dunfell-5.4-2.1.x-v1.3.img.gz |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
Change List | Description |
---|---|
Release 1.3 | |
Linux kernel updates: | |
imx8mq_var_dart_defconfig: enable driver for ADIN PHY | |
imx8mq-var-dart: fec: add phy-reset-post-delay | |
imx8mq-var-dart: Update machine name | |
net: phy: adin: add adi,phy-mode-override property | |
MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support | |
U-Boot updates: | |
imx8mq_var_dart: fec: add phy-reset-post-delay | |
variscite: eth: ADIN1300: Disable RGMII RX clock delay | |
variscite: imx8_eeprom: drop VAR_EEPROM_F_LVDS and cleanup indentation | |
meta-variscite-fslc updates: | |
pm-utils: Add Ethernet suspend/resume scripts for DART-MX8M | |
bcm43xx-utils: remove bash dependency from Wi-Fi scripts | |
Release 1.2 | |
Linux kernel updates: | |
imx8mq_var_dart_defconfig: add full docker support | |
imx8mq-var-dart: Introduce support for pcal6408 | pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A |
gpio: pca953x: Introduce standard-regs-fallback property | |
gpio: pca953x: Introduce support for nxp,pcal6408 | |
Revert 'Revert 'gpio: pca953x: Disable PM routines | |
U-Boot updates: | |
imx8mq_var_dart: Use same relocation address for 1G,2G,3G,4G SOMs | This fixes invalid hab_status response on 3G/4G modules |
Release 1.1 | |
meta-variscite-fslc: updated to latest release | |
Kernel: ported NXP MLK-25349 fixes | For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599 |
Kernel: upgraded to release 5.4.142 | |
U-Boot: updated to latest release | |
Updated Qt version from 6.0.3 to 6.0.4 | |
Release 1.0 | |
First Release |