DART-MX8M Release Notes
From Variscite Wiki
DART-MX8M
Release Notes
Android mx8m-android-11.0.0_1.0.0-v1.3
Release Notes
Based on release | Google: android-11.0.0_r4 NXP BSP: Android 11.0.0_1.0.0 |
Release tag | mx8m-android-11.0.0_1.0.0-v1.3 |
Release date | 05/30/2022 |
Supported platforms | DART-MX8M |
SOM revision | v1.1 and higher |
NXP BSP FTP | imx-android-11.0.0_1.0.0.tar.gz |
Variscite BSP git | https://github.com/varigit/MX6x-android |
Variscite BSP branch | android-11.0.0_1.0.0-var01 |
Kernel git | https://github.com/varigit/linux-imx |
Kernel branch | android-11.0.0_1.0.0-var01 |
U-Boot git | https://github.com/varigit/uboot-imx |
U-Boot branch | imx_v2020.04_5.4.47_2.2.0_var01 |
Cortex M4 U-Boot support | MCUXPRESSO_2.9.0_V1.0_DART-MX8M |
Cortex M4 Linux remoteproc support | MCUXPRESSO_2.9.0_V1.0_DART-MX8M |
File System build system | Android |
Recovery SD card link | mx8m__yocto-hardknott-5.10.72_2.2.1-v1.0__android-11.0.0_1.0.0-v1.3.img.gz
|
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
Change List | Description |
---|---|
Release 1.3 | |
ADIN1300: Disable RGMII RX clock delay | |
Enable defconfig for ADIN PHY | |
Add phy-reset-post-delay | Without a delay, the generic phy driver may be incorrectly used for adin1300 under some conditions. |
Change machine name from 2.x to "2.x and above" | This is to reflect support for DT8MCustomboard 3.0 |
Release 1.2 | |
Kernel: Introduce support for pcal6408 | pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A |
Remap buttons | Home maps to Android Home screen, Up maps to Volume up and Down maps to Volume Down |
Fix suspend-resume issue | |
P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frame API | |
Release 1.1 | |
Add PCIE PHY power regulator | |
Remove "hard-wired" PCIE0 controller property | |
MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3 | |
MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy | |
MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy | For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599 |
Release 1.0 | |
Android 11.0.0 v1.0.0 (kernel 5.4.47) for DART-MX8M | |
Known Issues | |
WiFi hotspot SSID broadcast not working reliably | It is a known issue also on NXP's EVK |