Release Notes

Based on release	B2Qt Dunfell, Poky 3.1.7, BSP: NXP , Linux: imx_5.4.24_2.1.0
Release git	https://github.com/varigit/meta-variscite-boot2qt
Release tag	mx7-b2qt-dunfell-5.4-2.1.x-v1.1
Release Branch	dunfell-var01
Date	06/24/2022
Supported platforms	VAR-SOM-MX7
SOM revision	VAR-SOM-MX7 v1.x / VAR-SOM-MX7-5G v2.x
Embedded Linux Distribution	B2Qt Community BSP Dunfell 3.1.7 based
B2Qt Community BSP link	https://doc.qt.io/QtForDeviceCreation/
Qt version	6.0.4
Kernel git	https://github.com/varigit/linux-imx
Kernel branch	5.4-2.1.x-imx_var01
U-Boot git	https://github.com/varigit/uboot-imx
U-Boot branch	imx_v2018.03_4.14.78_1.0.0_ga_var02
File System build system	B2Qt Dunfell
Recovery SD card link	mx7-b2qt-dunfell-5.4-2.1.x-v1.1.img.gz

After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List
Release v1.1
U-Boot: mx7dvar_som: Add support for Analog Devices ADIN1300 PHY
kernel: MLK-14644 PCI: imx: toggle the perst after the release of rc's reset
kernel: imx7d-var-som: fec: add 20ms phy-reset-post-delay
kernel: imx7d-var-som: Override FEC property phy-mode for ADIN PHY
kernel: net: phy: adin: add adi,phy-mode-override property
kernel: imx_v7_var_defconfig: Enable driver for ADIN PHY
kernel: added SDMA support for SPIs
kernel: fixed dts compiler warnings
kernel: fixed ads7846 resistive touch behavior
kernel: merged to 5.4.142
Release v1.0
Initial B2Qt Dunfell release for the VAR-SOM-MX7