DART-MX8M-MINI Release Notes
From Variscite Wiki
DART-MX8M-MINI
/ VAR-SOM-MX8M-MINI Release Notes
Yocto dunfell-fslc-5.4-2.1.x-mx8mm-v1.7
Release Notes
| Based on release | Yocto: Poky 3.1, BSP: FSLC 3.1, Linux: 5.4-2.1.x-imx |
| Release tag | dunfell-fslc-5.4-2.1.x-mx8mm-v1.7 |
| Release manifest | default.xml |
| Date | 10/27/2021 |
| Supported platforms | DART-MX8M-MINI / VAR-SOM-MX8M-MINI |
| SOM revision | v1.0 and higher |
| File System build system | Yocto Dunfell |
| Recovery SD card link | dart-mx8mm-recovery-sd.v68.img.gz |
| Cortex M4 U-Boot support | MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI |
| Cortex M4 Linux remoteproc support | MCUXPRESSO_2.9.0_V1.0_DART-MX8M-MINI |
Relevant git Repositories
| Source | Repository | Branch | Commit ID |
|---|---|---|---|
| U-Boot | https://github.com/varigit/uboot-imx | imx_v2020.04_5.4.24_2.1.0_var02 | 599f8b866571aa0c7127a30da04932d4b870a24e |
| Kernel | https://github.com/varigit/linux-imx | 5.4-2.1.x-imx_var01 | 5227ff0e2a5ca08777d926a440244975ffb0d095 |
| meta-variscite-fslc | https://github.com/varigit/meta-variscite-fslc | dunfell | 23e50da327ebbafa05b11d300ab16e56944f8eec |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
| Change List | Description |
|---|---|
| Release 1.7 | |
| sn65dsi83: Add device tree property to swap LVDS Channel A/B | |
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" | |
| Release 1.6 | |
| Updated Kernel from 5.4.85 to 5.4.142 | |
| Update Yocto meta layers to latest:
yocto/poky yocto/meta-freescale oe/meta-openembedded oe/meta-python2 freescale/meta-freescale-3rdparty freescale/meta-freescale-distro freescale/Documentation QT5/meta-qt5 sbabic/meta-swupdate yocto/meta-virtualization varigit/meta-variscite-fslc | |
| linux-firmware: update TI WL18xx BT service pack to v4.7 | |
| linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 | |
| linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 | |
| fsl-image-gui: Add libgpiod and libgpiod-tools | |
| Release 1.5 | |
| U-Boot: Moved the setting of the console env. variable from the source code to a script in the default env. | |
| Added dependencies to avoid conflict between connman and systemd-networkd | |
| Release 1.4 | |
| Fixed CAN controller pins | The MCP2518FD driver does not use the TX-INT pin, so removed GPIO1_15 from the CAN controller pins |
| Release 1.3 | |
| Added support for VAR-SOM-MX8M-MINI revision 1.3 | |
| Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation | See: VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support |
| Release 1.2 | |
| Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 | |
| Release 1.1 | |
| Upgraded to kernel version 5.4.85 | |
| Added support for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A | |
| Removed support for VAR-SOM-MX8M-MINI SOM rev. 1.0 | |
| Fixed occasional pulseaudio device initialization problems | |
| Re-added packages available in previous Yocto releases | |
| Release 1.0 | |
| Initial Yocto Dunfell release for DART-MX8M-MINI and VAR-SOM-MX8M-MINI |