Release Notes

Based on release	Yocto: Poky 3.1, BSP: FSLC 3.1, Linux: 5.4-2.1.x-imx
Release tag	dunfell-fslc-5.4-2.1.x-mx8mq-v1.5
Release manifest	default.xml
Date	12/02/2021
Supported platforms	DART-MX8M
SOM revision	v1.1 and higher
File System build system	Yocto Dunfell
Recovery SD card link	dart-mx8m-recovery-sd.v73.img.gz
Cortex M4 U-Boot support	MCUXPRESSO_2.10.0_V1.0_DART-MX8M
Cortex M4 Linux remoteproc support	MCUXPRESSO_2.10.0_V1.0_DART-MX8M

Relevant git Repositories

Source	Repository	Branch	Commit ID
U-Boot	https://github.com/varigit/uboot-imx	imx_v2020.04_5.4.24_2.1.0_var02	cad9e7175c3f5984999a5eb7abea02ccb2d0cda3
Kernel	https://github.com/varigit/linux-imx	5.4-2.1.x-imx_var01	63c1015da979d2d9dc416edf6caef4fa6ff691ac
meta-variscite-fslc	https://github.com/varigit/meta-variscite-fslc	dunfell	c5b2b352d2bf67b25acfca9c14e7e25a27718b84

After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List	Description
Release 1.5
Kernel: Introduce support for pcal6408	pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A
meta-variscite-fslc: freertos-variscite: Add FreeRTOS 2.10.x support
Release 1.4
Kernel: fix resume sequence with all PCIe cards
Kernel: ads7846: fix the pressure_max setting
Kernel: sn65dsi83: allow swapping LVDS Channel A/B
Release 1.3
Updated Kernel from 5.4.85 to 5.4.142
Update Yocto meta layers to latest: yocto/poky yocto/meta-freescale oe/meta-openembedded oe/meta-python2 freescale/meta-freescale-3rdparty freescale/meta-freescale-distro freescale/Documentation QT5/meta-qt5 sbabic/meta-swupdate yocto/meta-virtualization varigit/meta-variscite-fslc
linux-firmware: Update TI WL18xx BT service pack to v4.7
linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7
linux-firmware: Update TI WL18xx to WiFi FW 8.9.0.0.88
sn65dsi83: Add optional "ti,even-odd-swap" device tree property to swap LVDS Channel A/B
Add PCIE PHY power regulator
Remove "hard-wired" PCIE0 controller property
MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3
MLK-25349-2 arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
MLK-25349-1 dt-bindings: imx6q-pcie: add one regulator used to power up pcie phy	For further details: https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Dual-8M-QuadLite-8M-Quad-Incorrect-PCIE-Supply/ta-p/1299599
fsl-image-gui: Add libgpiod and libgpiod-tools
Release 1.2
Fixed capacitive touch on DT8MCustomBoard V1.x
Release 1.1
Added support for DT8MCustomBoard V2.0
Removed support for DT8MCustomBoard V1.2 and below
Release 1.0
Initial Yocto Dunfell release for DART-MX8M
Fixed occasional pulseaudio device initialization problems