VAR-SOM-MX8X Release Notes
From Variscite Wiki
VAR-SOM-MX8X
Release Notes
Yocto dunfell-fslc-5.4-2.1.x-mx8x-v1.3
Release Notes
Based on release | Yocto: Poky 3.1, BSP: FSLC 3.1, Linux: 5.4-2.1.x-imx |
Release tag | dunfell-fslc-5.4-2.1.x-mx8x-v1.3 |
Release manifest | default.xml |
Date | 09/09/2021 |
Supported platforms | VAR-SOM-MX8X |
SOM revision | v1.1 and higher (B0/C0) |
File System build system | Yocto Dunfell |
Recovery SD card link | var-som-mx8x-recovery-sd.v41.img.gz var-som-mx8xb0-recovery-sd.v41.img.gz |
Cortex M4 U-Boot support | MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8X |
Cortex M4 Linux remoteproc support | MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8X |
Relevant git Repositories
Source | Repository | Branch | Commit ID |
---|---|---|---|
U-Boot | https://github.com/varigit/uboot-imx | imx_v2020.04_5.4.24_2.1.0_var02 | b3eb88c9fe46ee45371051092298f1cf3e686dfb |
Kernel | https://github.com/varigit/linux-imx | 5.4-2.1.x-imx_var01 | d471d2a4215c17f76de0ed13af578164d5287b1d |
meta-variscite-fslc | https://github.com/varigit/meta-variscite-fslc | dunfell | 952c2f7425fbfa7bbf676be085f3a435c9a7a2f3 |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
Release 1.3 | |
Updated Kernel from 5.4.85 to 5.4.142 | |
Update Yocto meta layers to latest:
yocto/poky yocto/meta-freescale oe/meta-openembedded oe/meta-python2 freescale/meta-freescale-3rdparty freescale/meta-freescale-distro freescale/Documentation QT5/meta-qt5 sbabic/meta-swupdate yocto/meta-virtualization varigit/meta-variscite-fslc || | |
linux-firmware: update TI WL18xx BT service pack to v4.7 | |
linux-firmware: Update BT/Wi-Fi firmware for bc43xx to 8.5.0.7 | |
linux-firmware: update TI WL18xx to WiFi FW 8.9.0.0.88 | |
fsl-image-gui: Add libgpiod and libgpiod-tools | |
Known Issues | |
On a small percentage of eMMCs an error was observed when switching to HS400 mode | Fixed by https://github.com/varigit//uboot-imx/commit/8e98463dbb |
Release 1.2 | |
wm8904: extend device tree support | Re-work DMIC support to address low volume issue |
Add dedicated wakeup support | Enable wakeup-source from Capacitive touch and pca9534 gpio-keys |
fec1: add phy-reset-on-resume property | Fix occasional eth0 fail upon resume from suspend |
Release 1.1 | |
Add support for VAR-SOM-MX8X with 1GB of RAM | |
Disable parallel_csi for m4 device tree | |
MLK-24874-1: include: uapi: fmd: fix the UAPI_HEADER_TEST/install failure | |
Pca953x: Disable PM routines | |
OV5640 mipi v2: Add deferred probe support for power and reset GPIOs | |
Moved i2c4 node in the apprpriate dts | Reorganized i2c4 node |
MLK-24997 remoteproc: imx_rproc: merge TCML/U | |
MLK-24892 remoteproc: imx_rproc: correct ddr alias for i.MX8M | |
Disable audmix node | |
Fix inconsistent clock handling for snvs_pwrkey during suspend/resume | |
MLK-23940-2 rtc: snvs: Add necessary clock operations for RTC APIs | |
MLK-23940-1 rtc: snvs: Make SNVS clock always prepared | |
Wifi: force connman/wpa_supplicant restart upon wakeup | |
Hostapd: disable the service when using sysvinit | |
Bluez-alsa | Replace pulseaudio with bluez-alsa
Play audio over Bluetooth using alsa without pulseaudio |
libubootenv | Allow U-Boot commands up to 4096 chars |
Release 1.0 | |
Initial Yocto Dunfell release for VAR-SOM-MX8X | |
Fixed occasional pulseaudio device initialization problems |