VAR-SOM-MX7 Release Notes
From Variscite Wiki
VAR-SOM-MX7
Release Notes
Debian bullseye-5.4.142-mx7-v1.1
Release Notes
| Based on release | Debian: Bullseye 11, Linux Kernel: NXP imx_5.4.24_2.1.0 |
| Release git | https://github.com/varigit/debian-var |
| Release branch | debian_bullseye_var01 |
| Release tag | imx7-var-som-debian-bullseye-v1.1 |
| Date | 05/09/2022 |
| Supported platforms | VAR-SOM-MX7 |
| SOM revision | VAR-SOM-MX7 v1.x / VAR-SOM-MX7-5G v2.x |
| Embedded Linux Distribution | Debian Bullseye |
| Recovery SD card link | imx7-var-som-debian-bullseye-v1.1.img.gz
|
Relevant git Repositories
| Source | Repository | Branch | Commit ID |
|---|---|---|---|
| U-Boot | https://github.com/varigit/uboot-imx | imx_v2018.03_4.14.78_1.0.0_ga_var02 | f634b812f90a786002921c6f4987b896e62c5d7c |
| Kernel | https://github.com/varigit/linux-imx | 5.4-2.1.x-imx_var01 | a9503b31b200c8ae67be03ed834736c61ab4ef9d |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log
| Change List | Description |
|---|---|
| Release v1.1 | |
| U-Boot: mx7dvar_som: Add support for Analog Devices ADIN1300 PHY | |
| kernel: imx7d-var-som: fec: add 20ms phy-reset-post-delay | |
| kernel: imx7d-var-som: Override FEC property phy-mode for ADIN PHY | |
| kernel: net: phy: adin: add adi,phy-mode-override property | |
| kernel: imx_v7_var_defconfig: Enable driver for ADIN PHY | |
| Release v1.0 | |
| Initial Debian Bullseye release |