Release Notes

Based on release	Google: android-10.0.0_r35 NXP BSP: Android Q10.0.0_2.3.0
Release tag	android-10.0.0_2.3.0-ga_dart-mx8mq_v1.2
Release date	03/08/2021
Supported platforms	DART-MX8M
SOM revision	v1.1 and higher
NXP BSP FTP	imx-android-10.0.0_2.3.0.tar.gz
Variscite BSP git	https://github.com/varigit/MX6x-android
Variscite BSP branch	android-10.0.0_2.3.0-ga-var01
Kernel git	https://github.com/varigit/linux-imx
Kernel branch	android-10.0.0_2.3.0-ga_var01
U-Boot git	https://github.com/varigit/uboot-imx
U-Boot branch	imx_v2020.04_5.4.24_2.1.0_var01
File System build system	Android
Recovery SD card link	dart-mx8m-recovery-sd.v62.img.gz

After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.

Change Log

Change List	Description
Release 1.2
Added support for DT8MCustomBoard V2.0
Removed support for DT8MCustomBoard V1.2 and below
Release 1.1
Android:
Updated bc43xx BT/WiFi firmware to Laird release 8.2.0.16
Kernel:
Updated VDD_GPU voltage	This solves GPU instability issues seen on a small percentage of SOMs
ATF:
imx-atf: Fix the suspend/resume hang issue on imx8mq b0
Release 1.0
Android 10.0.0 v2.3.0 (kernel 5.4.24) for DART-MX8M
Updated the mcp251xfd CAN FD driver to latest from git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git	A few errata fixes included
Known Issues
DisplayPort hotplug not supported	DP is not supported by NXP Android BSP at all. Variscite Android BSP does support it, but currently without hotplug.