VAR-SOM-MX6 Yocto NAND Recovery V50plus

Variscite provides a recovery SD card image that can be used to install the pre-built U-Boot, Linux kernel and the UBI file system into the NAND-Flash This SD card image includes a script (nand-recovery.sh) that installs all the boot images and root file-system.

Preparing a rescue SD card

Download mx6-som-nand-recovery-sd.vXX.img.gz (latest) which is available on Variscite's FTP: ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/
Plug-in the SD card to your Linux HOST PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)

$ gunzip mx6-som-nand-recovery-sd.XX.img.gz
$ sudo dd if=mx6-som-nand-recovery-sd.vXX.img of=/dev/sdX bs=1M

(Replace /dev/sdX with your actual device)

Recover NAND Flash

Power-off the board.
Insert the SD card into the SD/MMC slot of the carrier board (DVK)
Press and hold the boot-select button, and power-on the board while button is pressed
The board will automatically boot into Linux from SD card

Flash from GUI

Click on the right arrowhead on the upper right corner to change the desktop into Utilities.

Push Android-eMMC to flash Android into eMMC.
Push Yocto-NAND to flash Yocto into NAND.
Push Yocto-eMMC to flash Yocto into eMMC.

Flash from command line

Login as root (no password)
From Linux command line, type one of flash options

$ android-emmc.sh 	- Flash Android into eMMC
$ yocto-emmc.sh		- Flash Yocto into eMMC
$ yocto-nand.sh		- Flash Yocto into NAND

SD card image file tree

/media/rootfs/opt/images/
├── Android
│   └── Emmc
│       ├── SPL
│       ├── SPL.mmc
│       ├── boot-imx6q-var-dart.img
│       ├── boot-som-mx6dl-c.img
│       ├── boot-som-mx6dl-r.img
│       ├── boot-som-mx6q-c.img
│       ├── boot-som-mx6q-r.img
│       ├── boot-som-mx6q-vsc.img
│       ├── boot-som-solo-c.img
│       ├── boot-som-solo-r.img
│       ├── boot-som-solo-vsc.img
│       ├── boot.img
│       ├── recovery-imx6q-var-dart.img
│       ├── recovery-som-mx6dl-c.img
│       ├── recovery-som-mx6dl-r.img
│       ├── recovery-som-mx6q-c.img
│       ├── recovery-som-mx6q-r.img
│       ├── recovery-som-mx6q-vsc.img
│       ├── recovery-som-solo-c.img
│       ├── recovery-som-solo-r.img
│       ├── recovery-som-solo-vsc.img
│       ├── recovery.img
│       ├── system.img
│       ├── u-boot-var-imx6-nand.img
│       └── u-boot-var-imx6-sd.img
└── Yocto
    ├── SPL
    ├── SPL.mmc
    ├── rootfs.tar.bz2
    ├── rootfs.ubi.img
    ├── u-boot.img
    ├── u-boot.img.mmc
    ├── uImage
    ├── uImage-imx6dl-var-som-solo-vsc.dtb
    ├── uImage-imx6dl-var-som-solo.dtb
    ├── uImage-imx6dl-var-som.dtb
    ├── uImage-imx6q-var-dart.dtb
    ├── uImage-imx6q-var-som-vsc.dtb
    └── uImage-imx6q-var-som.dtb

Script files located on /media/rootfs/sbin/:

nand-recovery.sh
mkmmc_yocto.sh
yocto-dart.sh
yocto-emmc.sh
yocto-nand.sh
mkmmc_android.sh
android-emmc.sh