VAR-SOM-MX6 Yocto Recovery SD card V80plus

From Variscite Wiki
Revision as of 16:16, 30 November 2016 by Eran (talk | contribs) (Created page with "{{DocImage|category1=VAR-SOM-MX6|category2=Yocto}}Category:Android Variscite provides a recovery SD card image that can be used to install the pre-built U-Boot, Linux kern...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Variscite provides a recovery SD card image that can be used to install the pre-built U-Boot, Linux kernel and the file system into the internal storage/s of the SOM.

Preparing a recovery SD card

$ gunzip mx6-som-recovery-sd.vXX.img.gz
$ sudo umount /dev/sdX*
$ sudo dd if=mx6-som-recovery-sd.vXX.img of=/dev/sdX bs=1M

(Replace /dev/sdX with your actual device)

Recover NAND flash/eMMC

  • Power-off the board.
  • Insert the SD card into the SD card slot of the carrier board (DVK)
  • Press and hold the boot-select button, and power-on the board while button is pressed
  • The board will automatically boot into Linux from SD card

Flash from GUI

VAR-SOM-MX6 Krogoth Recovery.png

Click the appropriate button:

  • Yocto Jethro SOLOCB NAND: Flash Yocto on NAND flash, on VAR-SOLOCUSTOMBOARD
  • Yocto Jethro SOLOCB eMMC: Flash Yocto on eMMC, on VAR-SOLOCUSTOMBOARD
  • Yocto Jethro MX6CB Res NAND: Flash Yocto with Resistive touch panel support on NAND flash, on VAR-MX66CUSTOMBOARD
  • Yocto Jethro MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on VAR-MX66CUSTOMBOARD
  • Yocto Jethro MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on VAR-MX66CUSTOMBOARD
  • Yocto Jethro MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on VAR-MX66CUSTOMBOARD.
  • Yocto Jethro DART (eMMC): Flash Yocto on eMMC, on DART-BOARD
  • Android SOLOCustomBoard eMMC: Flash Yocto on eMMC, on VAR-SOLOCUSTOMBOARD
  • Android MX6CB Cap: Flash Yocto with Capacitive touch panel support on eMMC, on VAR-MX66CUSTOMBOARD
  • Android MX6CB Res: Flash Yocto with Resistive touch panel support on eMMC, on VAR-MX66CUSTOMBOARD
  • Android DART: Flash Yocto on eMMC, on DART-BOARD

Flash from command line

  • Login as root (no password)
  • From Linux command line, type one of flash options
$ install_android.sh	- Flash Android into eMMC (Follow instructions)
$ install_yocto.sh	- Flash Yocto into eMMC or NAND Flash (Follow instructions)

SD card image file tree

/opt/images/
├── Android
│   ├── SPL-mmc
│   ├── SPL-nand
│   ├── boot-imx6q-var-dart.img
│   ├── boot-som-mx6dl-c.img
│   ├── boot-som-mx6dl-r.img
│   ├── boot-som-mx6q-c.img
│   ├── boot-som-mx6q-r.img
│   ├── boot-som-mx6q-vsc.img
│   ├── boot-som-solo-c.img
│   ├── boot-som-solo-r.img
│   ├── boot-som-solo-vsc.img
│   ├── recovery-imx6q-var-dart.img
│   ├── recovery-som-mx6dl-c.img
│   ├── recovery-som-mx6dl-r.img
│   ├── recovery-som-mx6q-c.img
│   ├── recovery-som-mx6q-r.img
│   ├── recovery-som-mx6q-vsc.img
│   ├── recovery-som-solo-c.img
│   ├── recovery-som-solo-r.img
│   ├── recovery-som-solo-vsc.img
│   ├── system.img
│   ├── u-boot-var-imx6-mmc.img
│   └── u-boot-var-imx6-nand.img
└── Yocto
    ├── SPL-nand
    ├── SPL-sd
    ├── imx6dl-var-som-cap.dtb
    ├── imx6dl-var-som-res.dtb
    ├── imx6dl-var-som-solo-cap.dtb
    ├── imx6dl-var-som-solo-res.dtb
    ├── imx6dl-var-som-solo-vsc.dtb
    ├── imx6dl-var-som-vsc.dtb
    ├── imx6q-var-dart.dtb
    ├── imx6q-var-som-cap.dtb
    ├── imx6q-var-som-res.dtb
    ├── imx6q-var-som-vsc.dtb
    ├── rootfs.tar.bz2
    ├── rootfs.ubi
    ├── u-boot.img-nand
    ├── u-boot.img-sd
    └── uImage

The install_android.sh & install_yocto.sh script files are located at /usr/bin/