Debian Build Release TI
This page is using the default release am62-debian-bookworm-6.1.83_09.02.01.10-v1.0.
To view this page for a specific Variscite SoM and software release, please follow these steps:
- Visit variwiki.com
- Select your SoM
- Select the software release
Since Debian Bookwarm with TI release 09.02.01.10, the debian build system has transitioned to using TI-customized version of bdebstrap for creating root filesystems. TI customized the bdebstrap also integrates additional components, including the TI Graphics SDK and other essential packages tailored for am62 platforms. Therefore, it is recommended to familiarize yourself with the following guides first:
Variscite customizes the TI-modified bdebstrap by adding their own tailored U-Boot, kernel, and other specialized packages to suit VAR-SOM-AM62 SOM.
Create build environment
These instructions were tested on Ubuntu 22.04 x64 host PCs. When using other distributions, there may be issues.
Installing required packages
Please make sure your host PC is running Ubuntu 22.04 64-bit and is up to date:
$ sudo apt-get update && sudo apt-get dist-upgrade
Then, install the following packages:
$ sudo apt install -y pigz expect pv binfmtc binfmt-support qemu-user \ qemu-user-static qemu-system-arm debian-archive-keyring bdebstrap \ build-essential autoconf automake bison flex libssl-dev \ bc git wget u-boot-tools swig python3-pyelftools python3-pip python3-dev \ python3-yaml python3-jsonschema python3-cryptography $ sudo apt install --fix-broken $ sudo pip3 install toml-cli
For Ubuntu 20.04 and earlier, install python2:
$ sudo apt-get install python python-pysqlite2
-->Starting in Ubuntu 22.04, python2 is no longer available. Install the following to create a symbolic link from python to python3:
$ sudo apt-get install python-is-python3
Create a build directory:
$ mkdir ~/debian_am62x_var_som $ cd ~/debian_am62x_var_som
Deploy source
Download archive containing the build script and support files for building Debian Bookworm for the VAR-SOM-AM62:
$ git clone https://github.com/varigit/ti-bdebstrap -b debian_bookworm_var01 debian_am62x_var_som
= Building the Debian image = (Internet and ipv6 connection should be available):
$ cd ~/debian_am62x_var_som $ sudo ./build.sh am62-bookworm-09.02.01.10_var01
The ouput build logs can be found under ~/debian_am62x_var_som/logs/am62-bookworm-09.02.01.10_var01.log
Create debian image
$ sudo ./create-wic.sh am62-bookworm-09.02.01.10_var01
This image combines the U-Boot bootloader, kernel, device tree blob (DTB), and root filesystem (rootfs) into a single, complete disk image, ready for deployment.
The image is located at ~/debian_am62x_var_som/build/am62-bookworm-09.02.01.10_var01
Build Results
| Image name |
How to use |
|---|---|
| tisdk-am62-bookworm-variscite-am62xx-var-som-rootfs.tar.xz | Root filesystem tarball used for installation on SD card and eMMC |
| tisdk-am62-bookworm-variscite-am62xx-var-som-boot.tar.xz boot/tiboot3-am62x-gp-evm.bin boot/tiboot3-am62x-hs-evm.bin boot/tiboot3-am62x-hs-fs-evm.bin boot/tiboot3.bin boot/tispl.bin boot/u-boot.img |
tisdk-am62-bookworm-variscite-am62xx-var-som-boot.tar.xz that contains U-boot images |
| tisdk-debian-bookworm-am62xx-var-som.wic.zst | wic image to flash on SD card |
| tisdk-debian-bookworm-am62xx-var-som-recovery-image.wic.zst | Debian Recovery Image to install debian on eMMC |
| am62-bookworm-09.02.01.010_var01.swu | update debian using swupdate agent |
Create a bootable SD card
SD Card Structure
Disk /dev/sda: 7,4 GiB, 7948206080 bytes, 15523840 sectors Disk model: Storage Device Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x4046c095
Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 264191 262144 128M c W95 FAT32 (LBA) /dev/sda2 264192 15523839 15259648 7,3G 83 Linux
- sda1 is the fat partition which contains uboot images for r5 and a53 (tiboot3.bin , tispl.bin and uboot.img)
- sda2 partition is an ext3/ext4 partition that contains the complete root filesystem (including kernel image and device tree files under /boot).
Flash the image on SD card
Flash the image tisdk-debian-bookworm-am62xx-var-som.wic.zst located in the folder debian_am62x_var_som/build/am62-bookworm-09.02.01.10_var01. This is a complete, bootable image that can be directly flashed onto an SD card. Refer to Build Results section
Example usage:
$ sudo umount /dev/sdX* $ cd debian_am62x_var_som/build $ zstdcat tisdk-debian-bookworm-am62xx-var-som.wic.zst | sudo dd of=/dev/sdX bs=1M conv=fsync
Replace sdX with the right device name. This can be obtained by "dmesg" command on your host Linux PC, after the SD card reader is inserted.
Extending the SD Card Size
Flashing the default .img.zst images from Yocto results in a rootfs that does not utilize the entire SD card. This section explains how the SD card can be extended on the build host after flashing.
Procedure:
Begin with an SD card on which you have previously flashed a Yocto .img.zst image. Ensure the SD card is inserted and the device present (i.e. /dev/sda, /dev/mmcblk0, etc.)
$ sudo fdisk /dev/sdX
Disk /dev/sda: 7,4 GiB, 7948206080 bytes, 15523840 sectors Disk model: Storage Device Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x4046c095
Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 264191 262144 128M c W95 FAT32 (LBA) /dev/sda2 264192 15523839 15259648 7,3G 83 Linux
sda2 which is having rootfs , so we can use sda2 to resize the filesystem.
Next, run the following sequence of commands followed by enter with each step explained with a "-" to the right. Each command/input should be followed by enter:
- d - Delete current partition (2).
- n - Create a new parition.
- - Empty, hit enter only which will leave default response p for primary partition.
- - Empty, hit enter only which will leave default response 2 for first partition.
- - Empty, hit enter only which will leave default response as 264192 for first sector.
- - Empty, hit enter only which will leave default response as 15523839 for last sector.
- N - Answers no to not remove the ext3 signature on the disk
- p - Print output and verify before we write. We should see the starting offset the same and the end expanded to fill the SD card.
- w - Write output to disk
See the full log of the above sequence below:
$ sudo fdisk /dev/sda
This disk is currently in use - repartitioning is probably a bad idea. It's recommended to umount all file systems, and swapoff all swap partitions on this disk.
Command (m for help): n Partition type
p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions)
Select (default p): p Partition number (1-4, default 1): First sector (2048-15523839, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (2048-15523839, default 15523839): +128M
Command (m for help): p
Disk /dev/sda: 7,4 GiB, 7948206080 bytes, 15523840 sectors Disk model: Storage Device Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xb9b89088
Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 264191 262144 128M c W95 FAT32 (LBA) /dev/sda2 264192 12582911 12318720 5,9G 83 Linux
Command (m for help): d Partition number (1,2, default 2):
Partition 2 has been deleted.
Command (m for help): n Partition type
p primary (1 primary, 0 extended, 3 free) e extended (container for logical partitions)
Select (default p):
Using default response p. Partition number (2-4, default 2): First sector (264192-15523839, default 264192): Last sector, +/-sectors or +/-size{K,M,G,T,P} (264192-15523839, default 15523839):
Created a new partition 2 of type 'Linux' and of size 7,3 GiB. Partition #2 contains a ext3 signature.
Do you want to remove the signature? [Y]es/[N]o: N
Command (m for help): p
Disk /dev/sda: 7,4 GiB, 7948206080 bytes, 15523840 sectors Disk model: Storage Device Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xb9b89088
Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 264191 262144 128M c W95 FAT32 (LBA) /dev/sda2 264192 15523839 15259648 7,3G 83 Linux
Command (m for help): w The partition table has been altered. Syncing disks.
Finally, the file system needs to be resized on the disk to fill the now larger partition. Do that as follows:
$ sudo e2fsck -f /dev/sdX2
e2fsck 1.46.5 (30-Dec-2021) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information rootfs: 59259/385024 files (7.4% non-contiguous), 590981/1539840 blocks
$ sudo resize2fs /dev/sdX2
resize2fs 1.46.5 (30-Dec-2021) Resizing the filesystem on /dev/sda2 to 1907456 (4k) blocks. The filesystem on /dev/sda2 is now 1907456 (4k) blocks long.
$ sync
Again, numbers and output should differ slightly depending on your card.
Your rootfs image should now fill the entire SD card and is ready to boot.
Boot the board with a bootable SD card
Setting the Boot Mode
Make sure the BOOT SELECT DIP switch on the carrier board is set correctly before you power on the board.
SW7 0 : Boot from SD card 1 : Boot from eMMC
Automatic device tree selection in U-Boot
As shown in the Build Results table above, we have different kernel device trees, corresponding to our different H/W configurations (sometimes they are renamed without the "-" prefix).
We implemented a script in U-Boot's environment, which sets the fdt_file environment variable based on the detected hardware. }}
Enable/Disable Automatic Device Tree selection
To enable the automatic device tree selection in U-Boot (already enabled by default):
$ setenv fdt_file undefined $ saveenv
To disable the automatic device tree selection in U-Boot, set the device tree file manually:}}
$ setenv fdt_file YOUR_DTB_FILE $ saveenv
Debian Recovery Image
The Debian recovery image, named tisdk-debian-bookworm-am62xx-var-som-recovery-image.wic.zst, is located in debian_am62x_var_som/build/am62-bookworm-09.02.01.10_var01. This image is used to create a bootable SD card that contains another target image to be programmed to the eMMC. See the Recovery SD card or the more manual Installing Debian to the SOM's internal storage articles for specifics of installing a recovery image.
Usage:
To create a recovery image, simply run the following from your Debian environment:
$ cd debian_am62x_var_som/scripts/am62x-var-som $ ./create-recovery-sdcard.sh am62-bookworm-09.02.01.10_var01
Linux console access
Default users and passwords
| User name | User password | User descriptor |
|---|---|---|
| root | root | system administrator |
| user | user | local user |
You can customize the users during runtime with the common known methods in Debian. Please follow up with the next section if you'd like to customize them during the build.