DART-MX8M-MINI rev changelog

From Variscite Wiki
Revision as of 12:00, 20 March 2024 by Alifer (talk | contribs) (Add support for DART-MX8M-MINI v2.0)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

DART-MX8M-MINI changelog

DART-MX8M-MINI V2.0 (February 2024)

Hardware Modifications

Redesigned SOM to support MaxLinear Ethernet PHY

Previous Manufacturer Previous MPN Updated Manufacturer Updated MPN
Analog Devices Inc. ADIN1300BCPZ MaxLinear MxL86110

Redesigned SOM to support Murata WiFi module

Previous Manufacturer Previous MPN Updated Manufacturer Updated MPN
Infineon CYW43353 / CYW4343W Murata LBES5PL2EL-SMP / LBEE5PL2DL-SMP


Software Modifications

Variscite is updating all relevant software repositories and recommends impacted users upgrade to the latest software version or update their U-Boot, kernel, and meta-layers to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release U-Boot Kernel meta-layer(s)
Yocto Mickledore (kernel 6.1.36)

uboot-imx (lf_v2023.04_var02)

  1. imx8mm_var_dart: add support for booting wbe and 1.x device trees
  2. imx8mm_var_dart: add support for DART-MX8M-MINI v2.0
  3. net:phy: mxl-8611x: configure rgmii rx clock delay
  4. variscite: imx8_eeprom.h: add support for major and minor som revision
  5. variscite: imx8_eeprom: add VAR_EEPROM_F_WBE som feature
  6. dt-bindings: add device tree bindings and includes for mxl-8611x PHY
  7. phy: mxl-8611x: add driver for MaxLinear mxl-8611x PHYs

linux-imx (lf-6.1.y_var03)

  1. imx8mm-var-dart: add support for DART-MX8M-MINI 2.0
  2. net:phy: mxl-8611x: configure rgmii rx clock delay
  3. dt-bindings: net: add bindings for MaxLinear MXL8611x PHY driver
  4. net:phy: mxl-8611x: use device tree properties to configure LEDs
  5. arm64: configs: imx8_var_defconfig: enable CONFIG_MAXLINEAR_8611X_PHY
  6. net: phy: mxl-8611: add support for MaxLinear MxL86110x/MxL86111x

meta-variscite-bsp-common

  1. var-mii: update to latest
  2. iw612-utils: add support for DART-MX8M-MINI
  3. iw612-utils: install var_wifi_mod_para
  4. ot-daemon: add patch to make reset gpio optional
  5. iw612-utils: configure networkmanager to not manage wfd0 and uap0

meta-variscite-bsp-imx

  1. linux-variscite: add support for DART-MX8M-MINI v2.0
  2. Add support for IW612 on DART-MX8M-MINI WiFi/BT scripts
  3. u-boot-variscite: update to latest
  4. kernel-module-nxp-wlan: drop driver module configurations
  5. kernel-module-nxp-wlan: moal: use independent reset for sdio firmware
  6. firmware-nxp-wifi: update IW612 firmware to 18.99.2.p19.17
  7. nxp-wlan-sdk: drop overrides in favor of NXP's latest
Yocto Mickledore (kernel 6.1.22) Coming soon... Coming soon... Coming soon...
Yocto Kirkstone (kernel 5.15.60) Coming soon... Coming soon... Coming soon...
Yocto Hardknott (kernel 5.10.72) Coming soon... Coming soon... Coming soon...
Yocto Hardknott (kernel 5.4.127) Coming soon... Coming soon... Coming soon...
Yocto Dunfell (kernel 5.4.142) Coming soon... Coming soon... Coming soon...
Yocto Zeus (kernel 5.4.3)

uboot-imx (lf-5.4.y_v2019.04_var01)

  1. imx8mm_var_dart: add support for booting 1.x device tree
  2. imx8mm_var_dart: add support for MaxLinear MXL8611X Ethernet PHY
  3. variscite: imx8_eeprom.h: add support for major and minor som revision
  4. variscite: imx8_eeprom: Use BIT macros for bits
  5. variscite: eth: Add support for MXL611x ethernet phy
  6. net: phy: mxl-8611x: fix ethernet-phy node handle
  7. net:phy: mxl-8611x: configure rgmii rx clock delay
  8. phy: mxl-8611x: add driver for MaxLinear mxl-8611x PHYs
  9. dt-bindings: add device tree bindings and includes for mxl-8611x PHY

linux-imx (lf-5.4.y_var01)

  1. imx8mm_var_dart: add legacy support for 1.x modules
  2. imx8mm-var-dart: add support for DART-MX8M-MINI 2.0
  3. net: phy: mxl-8611: backport: replace phy_lock_mdio_bus with mutex_lock
  4. net: phy: mxl-8611: backport: drop support for MXL86111
  5. arm64: configs: imx8_var_defconfig: enable CONFIG_MAXLINEAR_8611X_PHY
  6. net:phy: mxl-8611x: configure rgmii rx clock delay
  7. dt-bindings: net: add bindings for MaxLinear MXL8611x PHY driver
  8. net:phy: mxl-8611x: use device tree properties to configure LEDs
  9. net: phy: mxl-8611: add support for MaxLinear MxL86110x/MxL86111x

meta-variscite-imx

  1. linux-variscite: update to latest
  2. u-boot-variscite: update to latest
  3. imx8mm-var-dart: add nxpiw612-sdio to MACHINE_FEATURES
  4. bluez5: add iw61x bluetooth initialization
  5. bcm43xx-utils: add support for iw61x wlan
  6. variscite: conditionally add iw61x support to images
  7. bluez5: variscite-bt-common: refactor identation
  8. linux-firmware: add 18.99.2.p19.17 nxpiw612-sdio firmware package
  9. kernel-module-nxp-wlan: add iw61x driver based on lf-6.1.36_2.1.0
Android 13.0.0_1.0.0 (kernel 5.15.71) Coming soon... Coming soon... Coming soon...
Android 12.0.0_1.0.0 (kernel 5.10.72) Coming soon... Coming soon... Coming soon...
Android 11.0.0_2.6.0 (kernel 5.10.72) Coming soon... Coming soon... Coming soon...
Android 11.0.0_2.4.0 (kernel 5.10.52) Coming soon... Coming soon... Coming soon...
Android 11.0.0_1.0.0 (kernel 5.4.47) Coming soon... Coming soon... Coming soon...
Android 10.0.0_2.6.0 (kernel 5.4.70) Coming soon... Coming soon... Coming soon...
Bullseye (kernel 5.4.142) Coming soon... Coming soon... Coming soon...
Bullseye (kernel 5.4.3) Coming soon... Coming soon... Coming soon...
Boot2Qt Kirkstone (Qt 6.4.3, kernel 5.15.60) Coming soon... Coming soon... Coming soon...
Boot2Qt Hardknott (Qt 6.2.4, kernel 5.10.72) Coming soon... Coming soon... Coming soon...
Boot2Qt Dunfell (Qt 6.0.4, kernel 5.4.142) Coming soon... Coming soon... Coming soon...


DART-MX8M-MINI V1.3

Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer Old MPN New Manufacturer New MPN
Qualcomm AR8033-AL1A-R /
AR8033-AL1B-R 		Analog Devices Inc ADIN1300BCPZ

Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release U-Boot Kernel
Yocto Hardknott 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay 		1) imx8_var_defconfig: enable driver for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye (kernel 5.4.142) 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay 		1) imx8_var_defconfig: enable driver for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Zeus / Debian Bullseye (kernel 5.4.3) 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay 		1) imx8_var_defconfig: enable driver for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Warrior / Debian Buster (kernel 4.19.35) variscite: eth: ADIN1300: Disable RGMII RX clock delay 1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Sumo / B2Qt Sumo (kernel 4.14.98) variscite: eth: ADIN1300: Disable RGMII RX clock delay 1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 11.0.0_2.6.0 1) imx8mm-var-dart: Enable CONFIG_PHY_ADIN
2) phy: adin: add driver for Analog Devices ADIN1300 PHY 		1) enable defconfig for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 11.0.0_2.4.0 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay 		1) enable defconfig for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 11.0.0_1.0.0 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay 		1) enable defconfig for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 10.0.0_2.6.0 1) imx8mm-var-dart: Add support for Analog Devices ADIN1300 PHY
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay 		1) enable defconfig for ADIN PHY
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 10.0.0_1.0.0 variscite: eth: ADIN1300: Disable RGMII RX clock delay 1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Android 9.0.0_2.0.0 variscite: eth: ADIN1300: Disable RGMII RX clock delay 1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8mm-var-dart: fec: add 20ms phy-reset-post-delay
Note: These patches are backward-compatible with the previous SOM revisions.
Retrieved from "https://variwiki.com/index.php?title=DART-MX8M-MINI_rev_changelog&oldid=25646"
Latest Modules
Support
Variscite Support Center
Contact Support
Product Longevity
Product Compliance Policy
Blog
Variscite Training
Variscite Website
This page was last edited on 20 March 2024, at 12:00.

© 2024 Variscite. All rights reserved