VAR-SOM-MX8M-NANO rev changelog

VAR-SOM-MX8M-NANO changelog

VAR-SOM-MX8M-NANO V1.5

Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer	Old MPN	New Manufacturer	New MPN
Qualcomm	AR8033-AL1A-R / AR8033-AL1B-R	Analog Devices Inc	ADIN1300BCPZ

Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release	U-Boot	Kernel
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye (kernel 5.4.142)	1) imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY 2) variscite: eth: ADIN1300: Disable RGMII RX clock delay	1) imx8_var_defconfig: enable driver for ADIN PHY 2) imx8mn-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Zeus (kernel 5.4.24)	1) imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY 2) variscite: eth: ADIN1300: Disable RGMII RX clock delay	1) imx8_var_defconfig: enable driver for ADIN PHY 2) imx8mn-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Zeus (kernel 5.4.3)	1) imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY 2) variscite: eth: ADIN1300: Disable RGMII RX clock delay	1) imx8_var_defconfig: enable driver for ADIN PHY 2) imx8mn-var-dart: fec: add 20ms phy-reset-post-delay
Yocto Sumo / Debian Buster (kernel 4.14.98)	variscite: eth: ADIN1300: Disable RGMII RX clock delay	net: fec: register ADIN1300 PHY fixup to configure rgmii
Android 11.0.0_2.6.0	1) imx8mn-var-som: Enable CONFIG_PHY_ADIN 2) phy: adin: add driver for Analog Devices ADIN1300 PHY	1) imx8mn-var-som: fec: add 20ms phy-reset-post-delay 2)imx8_var_android_defconfig: enable driver for ADIN PHY
Android 11.0.0_1.0.0	1) imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY 2) variscite: eth: ADIN1300: Disable RGMII RX clock delay	1) imx8mn-var-som: fec: add 20ms phy-reset-post-delay 2)imx8_var_android_defconfig: enable driver for ADIN PHY
Android 10.0.0_2.3.0	1) imx8mn-var-som: Add support for Analog Devices ADIN1300 PHY 2) variscite: eth: ADIN1300: Disable RGMII RX clock delay	1.) imx8mn-var-som: fec: add 20ms phy-reset-post-delay 2) imx8_var_android_defconfig: enable driver for ADIN PHY
Android 9.0.0_2.3.4	variscite: eth: ADIN1300: Disable RGMII RX clock delay	net: fec: register ADIN1300 PHY fixup to configure rgmii

Note: These patches are backward-compatible with the previous SOM revisions.