DART-MX8M-MINI Display

Introduction

MIPI-DSI and LVDS

i.MX8M-Mini SoC supports MIPI-DSI displays. DART-MX8M-MINI can be optionally equipped with SN65DSI84 MIPI-DSI to LVDS bridge.
DART-MX8M-MINI carrier board comes with LVDS connectors, so you can easily connect LVDS display.
Connecting MIPI-DSI display to DART-MX8M-MINI carrier board requires designing a custom connector.

Adding custom LVDS panel

DART-MX8M-MINI evaluation kit comes with 800x480 LCD panel. DART-MX8M-MINI DTS file was created with this panel in mind. To support your custom LVDS panel, you should make several modifications

Referencing custom panel in the DTS file

The following code references Variscite panel in arch/arm64/boot/dts/freescale/fsl-imx8mm-var-dart.dts under kernel source tree

	dsi_lvds_bridge: sn65dsi84@2c {
		compatible = "ti,sn65dsi83";
		reg = <0x2c>;
		ti,dsi-lanes = <1>;
		ti,lvds-format = <1>;
		ti,lvds-bpp = <24>;
		ti,width-mm = <154>;
		ti,height-mm = <87>;
		enable-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_lvds>;
		status = "okay";

		display-timings {
			lvds {
				clock-frequency = <33000000>;
				hactive = <800>;
				vactive = <480>;
				hback-porch = <40>;
				hfront-porch = <40>;
				vback-porch = <29>;
				vfront-porch = <13>;
				hsync-len = <48>;
				vsync-len = <3>;
				hsync-active = <0>;
				vsync-active = <0>;
				de-active = <1>;
				pixelclk-active = <0>;
			};
		};
        ...
        };

You should modify "ti,dsi-lanes", "ti,lvds-format" "ti,lvds-bpp", "ti,width-mm", "ti,height-mm" and display-timings properties to match your panel and rebuild the DTB file.