Android Canbus
From Variscite Wiki
CAN bus
Hardware Setup
Connect 2 boards with the appropriate cable.
File:CAN Bus Connection.png
Board A CAN_H --- CAN_H Board B
Board A CAN_L --- CAN_L Board B
Software Setup
Android current releases come with the canutils already installed.
Set up the boards by running the following on each of them:
$ ip link set can0 up type can bitrate 125000
Then:
On board #A:
$ cansniffer can0
On board #B:
$ cansend can0 500#1E.10.10
Canbus at Framework - Android Java application
- If you want the application to use the canbus, you must port the framework level changes - Port https://github.com/zhangjie201412/Flexcan to your android release.