VAR-SOM-MX6 Yocto Unit Testing
GPU
Play OpenGLES demo, from Linux shell type:
$ modprobe galcore $ cd /opt/viv_samples/vdk/ && ./tutorial3 -f 1000
WLAN
List SSIDs, from Linux shell type:
$ ifconfig wlan0 up $ iwlist wlan0 scan
Connecting to an encrypted network
Find your network from the above scan command.
$ wpa_passphrase <YourAP> <YourPassword> >wpa.conf $ ps | grep wpa_supplicant *kill the wpa_supplicant process if exist. $ wpa_supplicant -Dwext -iwlan0 -c./wpa.conf -B $ udhcpc -iwlan0 $ ifconfig
Giga Bit Ethernet
On Target:
$ ifconfig $ iperf -s -u on target
On Host:
$ iperf -c 192.168.1.189 -u -b1000M -w4KB
Bluetooth
$ hcitool scan $ l2ping 98:03:D8:C7:1A:96
Video playback
Play video file, from linux shell type:
$ gplay <file>
HDMI, LVDS , LCD boot arguments
All paramters are u-boot enviroment parameters.
Default:
U-Boot # setenv bootargs_base 'setenv bootargs console=ttymxc0,115200'
This will set the LCD to work.
HDMI 1080P:
U-Boot # setenv bootargs_base 'setenv bootargs console=ttymxc0,115200 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB16 fbmem=48M vmalloc=400 mxc_hdmi.only_cea=1'
mxc_hdmi.only_cea=1 paramter is to work with dvi-hdmi adapter. If you connect it to a TV-HDMI this paramters is not required.
HDMI 720P:
U-Boot # setenv bootargs_base 'setenv bootargs console=ttymxc0,115200 video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24'
LVDS and LCD Dual display:
U-Boot # setenv bootargs_base 'setenv bootargs console=ttymxc0,115200 ldb=dul0'
LVDS only display:
U-Boot # setenv bootargs_base 'setenv bootargs console=ttymxc0,115200 ldb=sin1'
LVDS only display with screen paramters:
U-Boot # setenv bootargs_base 'setenv bootargs console=ttymxc0,115200 ldb=sin1 video=mxcfb0:dev=ldb,800x600M@60,if=RGB24'
RTC
To set the RTC first set the date from Linux shell, type:
$ date 2013.08.27-15:43
Then set the real time clock from Linux shell, type:
$ hwclock --systohc
Power down your board wait 5 minutes and power up. Check your system with date and the time should be up to date.
Camera
$ modprobe ov5642_camera $ modprobe mxc_v4l2_capture $ /etc/rc5.d/S01xserver-nodm stop $ gst-launch mfw_v4lsrc ! mfw_v4lsink
External Uart
Use minicom to connect. Set the serial to ttymxc2 You can use a loopback or connect to anther computer
SATA
$ cat /proc/scsi/scsi $ fdisk /dev/sda & print
USB OTG as host
Plugin Disk on Key Keyboard or Mouse. It will work automaticly.
Use the file manager and the mouse to browse the file system.
You can open terminal and type in Linux commands.
USB OTG as device
Plug a cable to a A linux host.
Folow www.linux-usb.org/gadget/file_storage.html and build the backing_file.
On the Target:
modprobe g_file_storage file=./backing_file
On the Host:
use dmesg and find out your device for example /dev/sdb sudo dd if=/dev/zero of=/dev/sdb bs=128k count=1000
3 ports USB Host
Plug a DiskOnKey, Mouse or Keyboard to any of the 3 ports.
Canbus
- Patch the kernel. Download 0001-can-bus-enable.patch from our ftp site. Place it in VAR-MX6-yocto-dora-v3/sources/meta-fsl-arm-extra/recipes-kernel/linux/linux-variscite-3.0.35. Edit linux-variscite_3.0.35.bb change:
# SRC_URI += "file://0001-file-rename.patch \
#"
into:
SRC_URI += "file://0001-can-bus-enable.patch \
" - Add canutils. Edit VAR-MX6-yocto-dora-v3/sources/meta-fsl-demos/recipes-fsl/images/fsl-image-gui.bb. Add canutilis to the image build.
IMAGE_INSTALL += " \
${SOC_IMAGE_INSTALL} \
cpufrequtils \
nano \
packagegroup-fsl-gstreamer \
packagegroup-fsl-tools-testapps \
packagegroup-fsl-tools-benchmark \
packagegroup-qt-in-use-demos \
qt4-plugin-phonon-backend-gstreamer \
qt4-demos \
qt4-examples \
fsl-gui-extrafiles \
minicom \
imx-kobs \
tcf-agent \
openssh-sftp-server \
canutils \
" - Build and deploy your image.
- Connect 2 boards. Each board JP26 connect to the other with the right cable.
Set the 2 boards:
$ canconfig can0 bitrate 125000 $ ifconfig can0 up
On board 1:
canecho can0 -v
On board 2:
cansend can0 -i0x100 11 22 33 44