Debian Platform Customization

Debian

Documentation

Stretch 9

• Debian 9 - Stretch (released on 06/17/2017)

Documentation is available from wiki.debian.org

VAR-SOM-MX6

Build Results

The resulted images are located in ~/var_som_mx6_debian/output/.

Image Name	How to use
rootfs.tar.bz2	Used to create sdcard
uImage	Linux kernel image
SPL.mmc	SPL built for SD-Card and eMMC boot. The SPL is pre-u-boot SW component, required for DDR initialization
u-boot.bin.mmc	u-boot built for SD-Card boot, or eMMC boot in case of DART-MX6UL.
Device Tree Name	Boot Device
imx6dl-var-som-cap.dtb	VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with capacitive touch
imx6dl-var-som-res.dtb	VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with resistive touch
imx6dl-var-som-solo-cap.dtb	VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with capacitive touch
imx6dl-var-som-solo-res.dtb	VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with resistive touch
imx6dl-var-som-solo-vsc.dtb	VAR-SOM-SOLO with iMX6S/DL on SOLOCustomBoard with capacitive touch
imx6dl-var-som-vsc.dtb	VAR-SOM-MX6 with iMX6S/DL on SOLOCustomBoard with capacitive touch
imx6q-var-dart.dtb	DART-MX6 with iMX6D/Q on DARTCustomBoard with capacitive touch
imx6q-var-som-cap.dtb	VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with capacitive touch
imx6q-var-som-res.dtb	VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with resistive touch
imx6q-var-som-vsc.dtb	VAR-SOM-MX6 with iMX6D/Q on SOLOCustomBoard with capacitive touch

DART-6UL

Build Results

The resulted images are located in ~/var_mx6ul_dart_debian/output/.

Image Name	How to use
rootfs.tar.bz2	Used to create sdcard and rootfs.ubi.img
rootfs.ubi.img	Use for flash to nand
zImage	Linux kernel image
SPL-nand	SPL built for NAND flash. The SPL is pre-u-boot SW component, required for DDR initialization
SPL-emmc	SPL built for SD card and eMMC boot. The SPL is pre-u-boot SW component, required for DDR initialization
u-boot.bin.nand	U-Boot built for NAND flash.
u-boot.bin.emmc	u-boot built for SD card boot, or eMMC boot in case of DART-MX6UL.
Device Tree Name	Boot Device
imx6ul-var-dart-emmc_wifi.dtb	Boot from internal eMMC with WiFi enabled. (SD card & NAND flash disabled)
imx6ul-var-dart-nand_wifi.dtb	Boot from internal NAND flash with WiFi enabled. (SD card & eMMC disabled)
imx6ul-var-dart-sd_emmc.dtb	SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card
imx6ul-var-dart-sd_nand.dtb	SD card and NAND flash enabled (WiFi & eMMC disabled). You can boot from NAND flash or SD card

VAR-SOM-MX7

Build Results

The resulted images are located in ~/var_mx7_var_som_debian/output/.

Image Name	How to use
rootfs.tar.bz2	Used to create sdcard and rootfs.ubi.img
rootfs.ubi.img	Use for flash to nand
zImage	Linux kernel image
u-boot.img.nand	U-Boot built for NAND Flash.
u-boot.img.emmc	u-boot built for SD-Card boot, or eMMC boot in case of DART-MX6UL.
Device Tree Name	Boot Device
imx7d-var-som-emmc.dtb	Boot from SD or internal eMMC
imx7d-var-som-nand.dtb	Boot from internal NAND

Platform Customizations

VAR-SOM-MX6

stretch-4.9.11-mx6-v1.0

• RELEASE_NAME = stretch-4.9.11-mx6-v1.0
• RELEASE_LINK = RELEASE_STRETCH_V1.0_VAR-SOM-MX6
• DEBIAN_NAME = Stretch
• DEBIAN_VERSION = 9.3
• RECOVERY_SD_NAME = stretch-4.9.11-mx6-v1.0.img.gz
• RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/debian
• RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTaKepnaAwm1umGw59L0ukHEa6VIIlEM9btCiWaXW0jx3nOQmwJ3h2QxyBbH2nMEwmDC_GvFbowtonR/pubhtml
• MACHINE_NAME = var-som-mx6
• KERNEL_GIT = https://github.com/varigit/linux-imx.git
• KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
• KERNEL_IMAGE = uImage
• KERNEL_DEFCONFIG = imx_v7_var_defconfig
• KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
• U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
• U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
• U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
• U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
• U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
• U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
• SPL_SD_IMAGE_NAME = SPL-sd
• SPL_NAND_IMAGE_NAME = SPL-nand
• DEBIAN_GIT = https://github.com/varigit/debian-var.git
• DEBIAN_BRANCH = debian_stretch_mx6_var01
• DEBIAN_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
• DEBIAN_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
• KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
• SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
• DEBIAN_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
• EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
• EMMC_ROOTFS_DEV = mmcblk0
• EMMC_ROOTFS_PARTITION_NUM = p1
• NAND_ROOTFS_DEV = mtd3
• RAM_LOAD_ADDRESS = 0x18100000
• UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
• UBOOT_PAD_SIZE = 0x1e0000
• KERNEL_PAD_SIZE = 0x800000
• DTB_START_ADDRESS = 0x3e0000

DART-6UL

stretch-4.9.11-mx6ul-v1.0

• RELEASE_NAME = stretch-4.9.11-mx6ul-v1.0
• RELEASE_LINK = RELEASE_STRETCH_V1.0_DART-6UL
• DEBIAN_NAME = Stretch
• DEBIAN_VERSION = 9.3
• RECOVERY_SD_NAME = stretch-4.9.11-mx6ul-v1.0.img.gz
• RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/debian
• RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTUPjdt-nbNyWUFxjrkoIw4H-s1h5Uo3HYgYQvzHgL1SMIutt7fzGm1zq5vgwLQhNAb7fTqETSjBn2J/pubhtml
• MACHINE_NAME = imx6ul-var-dart
• KERNEL_GIT = https://github.com/varigit/linux-imx.git
• KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
• KERNEL_IMAGE = zImage
• KERNEL_DEFCONFIG = imx_v7_var_defconfig
• U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
• U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
• U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
• U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
• U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
• U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
• SPL_SD_IMAGE_NAME = SPL-sd
• SPL_NAND_IMAGE_NAME = SPL-nand
• DEBIAN_GIT = https://github.com/varigit/debian-var.git
• DEBIAN_BRANCH = debian_stretch_mx6ul_var01
• DEBIAN_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS_STRETCH_PLUS
• DEBIAN_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
• KERNEL_DTB_SECTION = DART-6UL_DTB_STRETCH_PLUS
• SD_TREE_SECTION = DART-6UL_SD_TREE_STRETCH_PLUS
• EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
• EMMC_ROOTFS_DEV = mmcblk1
• EMMC_ROOTFS_PARTITION_NUM = p2
• NAND_ROOTFS_DEV = mtd4
• RAM_LOAD_ADDRESS = 0x83100000
• UBOOT_PAD_SIZE = 0x200000
• KERNEL_PAD_SIZE = 0x7e0000
• KERNEL_START_ADDRESS = 0xde0000
• DTB_START_ADDRESS = 0xde0000

VAR-SOM-MX7

stretch-4.9.11-mx7-v1.0

• RELEASE_NAME = stretch-4.9.11-mx7-v1.0
• RELEASE_LINK = RELEASE_STRETCH_V1.0_VAR-SOM-MX7
• DEBIAN_NAME = Stretch
• DEBIAN_VERSION = 9.3
• RECOVERY_SD_NAME = stretch-4.9.11-mx7-v1.0.img.gz
• RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/debian
• RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTHNiQATuLGEsjNKtjysSOV0eyi9UznbvtR-32fJjIeMUbfN0HA-O5v3v6n66_gbWZhL-fVS5dZG4Eq/pubhtml
• MACHINE_NAME = imx7-var-som
• KERNEL_GIT = https://github.com/varigit/linux-imx.git
• KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
• KERNEL_IMAGE = zImage
• KERNEL_DEFCONFIG = imx_v7_var_defconfig
• U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
• U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
• U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
• U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
• U-BOOT_SD_IMAGE_NAME = u-boot.imx-sd
• U-BOOT_NAND_IMAGE_NAME = u-boot.imx-nand
• SPL_SD_IMAGE_NAME = N/A
• SPL_NAND_IMAGE_NAME = N/A
• DEBIAN_GIT = https://github.com/varigit/debian-var.git
• DEBIAN_BRANCH = debian_stretch_mx7_var01
• DEBIAN_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
• DEBIAN_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
• KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
• SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE
• DEBIAN_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
• READ_ONLY_ROOTFS = '
• EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
• EMMC_ROOTFS_DEV = mmcblk2
• EMMC_ROOTFS_PARTITION_NUM = p2
• NAND_ROOTFS_DEV = mtd4
• RAM_LOAD_ADDRESS = 0x83100000
• UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
• KERNEL_PAD_SIZE = 0x7e0000
• KERNEL_START_ADDRESS = 0x600000
• DTB_START_ADDRESS = 0xde0000