Download packages and build.

Create directory tree

Create the following directory tree:

$ mkdir ~/sd410
$ cd ~/sd410

Download files from FTP site

Download the whole Ubuntu folder located in /dart-sd410/Software/ on Variscite FTP This will create the following directory tree

sd410
└── Debian
    └── Linaro-4.4.9(16.06)
        ├── kernel
        │   └── build.sh
        ├── ramdisk
        │   └── initrd.img-4.4.9-linaro-lt-qcom
        ├── RescueImages
        │   ├── sec.dat
        │   ├── flashall
        │   ├── boot-sd410.img
        │   ├── VAR-DT410_rootfs_alip_30Jun2016-68.img
        │   ├── VAR-DT410_rootfs_developer_30Jun2016-68.img
        │   ├── emmc_appsboot.mbn
        │   ├── hyp.mbn
        │   ├── rpm.mbn
        │   ├── sbl1.mbn
        │   ├── tz.mbn
        │   ├── license.txt
        │   ├── gpt_both0.bin
        │   ├── NON-HLOS.bin
        │   └── flashall.bat
        └── makebootimg.sh

NOTE:
Please refer to support@variscite.com for obtaining FTP credentials.

Download kernel source

Download kernel source from git repository

$ git clone https://github.com/varigit/DART-SD410-kernel.git kernel
$ git checkout -b release/qcomlt-4.2

Boot Image Build

Variscite suggests using the downloaded script for building the boot images. If something goes wrong then try the manual build.

Automatic creation of the boot image

Build kernel source using supplied script file:

$ ./makebootimg.sh

The kernel sources will be built and the output boot image file will be created in the ~/sd410/ubuntu/Linaro4.2/ directory

Manual kernel build

Export Envornment variables for compiler and architecture

$ export CROSS_COMPILE=aarch64-linux-gnu-
$ export ARCH=arm64

The gcc-aarch64-linux-gnu package usually intalled by default. If it is not installed run

$ sudo apt-get install gcc-aarch64-linux-gnu

Select the needed defconfig file for kernel:

$ make O=build-${ARCH} defconfig

Build the kernel and modules

$ make O=build-${ARCH} -j10 
$ make O=build-${ARCH} INSTALL_MOD_PATH=build-${ARCH}-modules modules_install

Manual boot image creation

You will need a default ramdisk for boot image creation.
It is located in the ramdisk directory of the downloaded folder.

Compress all the dtb files and the kernel image file into one dt.img file by:

$ ~/bin/skales/dtbTool -o dt.img -s 2048 kernel/build-${ARCH}/arch/arm64/boot/dts/qcom/

Export the command line for linux kernel by:

$ export cmdline="root=/dev/mmcblk0p10 rw rootwait console=ttyMSM0,115200n8"

Create the boot image by:

$ ~/bin/skales/mkbootimg --kernel kernel/build-${ARCH}/arch/arm64/boot/Image \
          --ramdisk ramdisk/initrd.img-4.2.4-linaro-lt-qcom \
          --output boot-sd410.img \
          --dt dt.img \
          --pagesize 2048 \
          --base 0x80000000 \
          --cmdline "$cmdline"

The file named boot-sd410.img is created. It should be burned into the board using fastboot. Remove unneeded dt.img file:

$ rm dt.img

Flash new image to the board

Cycle power of the VAR-SD410CustomBoard with Back button pressed. it will enter fastboot. run the following commend to update the boot image:

$ sudo fastboot flash boot boot-sd410.img
$ sudo fastboot reboot

The board will update the system and reboot with the updated kernel

DART-SD410 Ubuntu Download Packages

Contents