VAR-SOM-MX6 Start Here

VAR-SOM-MX6 - First Time? Start Here

     Under Construction!!!
        Under Construction!!!
           Under Construction!!!

Step One: Read Documentations

Please download and read the development kit documentation.

• VAR-SOM-MX6 Kit
• DART-MX6 Kit
• VAR-SOM-SOLO Kit

NOTE:
Make sure you read the Quick Start Guide.

Step Two: Development Environment

Set up your development environment.

• Setting Development Environment

Step Three: Power Up

Power up the board.
You should have the serial cable connected.
You should also see the u-boot output on the serial.

IMPORTANT:
Don't continue without the serial console operating.

Step Four: Create NAND recovery SDCARD

Create Yocto bootable SDCARD.

• NAND recovery