VAR-SOM-MX8M-PLUS rev changelog

From Variscite Wiki

VAR-SOM-MX8M-PLUS changelog

VAR-SOM-MX8M-PLUS V2.0 (February 2024)

Hardware Modifications

Redesigned SOM to support MaxLinear Ethernet PHY

Previous Manufacturer Previous MPN Updated Manufacturer Updated MPN
Analog Devices Inc. ADIN1300BCPZ MaxLinear MxL86110

Redesigned SOM to support Murata WiFi module

Previous Manufacturer Previous MPN Updated Manufacturer Updated MPN
Infineon CYW43353 / CYW4343W Murata LBES5PL2EL-SMP / LBEE5PL2DL-SMP


Software Modifications

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot, kernel, and meta-layers to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release U-Boot Kernel meta-layer(s)
Yocto Mickledore (kernel 6.1.36)

uboot-imx (lf_v2023.04_var02)

  1. imx8mp_var_dart: fix board_id detect for VAR-SOM-MX8M-PLUS 2.0
  2. net:phy: mxl-8611x: configure rgmii rx clock delay
  3. imx8mp_var_som: add support for MaxLinear mxl8611x Ethernet PHY
  4. imx8mp_var_som: add support for booting wbe and 1.x device trees
  5. variscite: imx8_eeprom.h: add support for major and minor som revision
  6. variscite: imx8_eeprom: add VAR_EEPROM_F_WBE som feature
  7. dt-bindings: add device tree bindings and includes for mxl-8611x PHY
  8. phy: mxl-8611x: add driver for MaxLinear mxl-8611x PHYs

linux-imx (lf-6.1.y_var03)

  1. imx8mp-var-som: fix pinctrl for 802.15.4
  2. imx8mp-var-som: fix compile warnings
  3. net:phy: mxl-8611x: configure rgmii rx clock delay
  4. imx8mp-var-som: add support for VAR-SOM-MX8M-PLUS 2.0
  5. arm64: imx8mp-var-dart: sort Makefile entrees alphabetically
  6. dt-bindings: net: add bindings for MaxLinear MXL8611x PHY driver
  7. net:phy: mxl-8611x: use device tree properties to configure LEDs
  8. arm64: configs: imx8_var_defconfig: enable CONFIG_MAXLINEAR_8611X_PHY
  9. net: phy: mxl-8611: add support for MaxLinear MxL86110x/MxL86111x

meta-variscite-bsp-common

  1. var-mii: update to latest
  2. iw612-utils.bb: add imx8mp-var-dart to COMPATIBLE_MACHINE
  3. iw612-utils: install var_wifi_mod_para
  4. ot-daemon: add patch to make reset gpio optional
  5. iw612-utils: configure networkmanager to not manage wfd0 and uap0

meta-variscite-bsp-imx

  1. linux-variscite: update to latest
  2. u-boot-variscite: update to latest
  3. iw612-utils: iw612-bt: imx8mp-var-som: wait for hci interface to come up
  4. imx8mp-var-dart: add initial support for VAR-SOM-MX8M-PLUS v2.0
  5. kernel-module-nxp-wlan: drop driver module configurations
  6. kernel-module-nxp-wlan: moal: use independent reset for sdio firmware
  7. firmware-nxp-wifi: update IW612 firmware to 18.99.2.p19.17
  8. nxp-wlan-sdk: drop overrides in favor of NXP's latest
Yocto Mickledore (kernel 6.1.22) Coming soon... Coming soon... Coming soon...
Yocto Kirkstone (kernel 5.15.71) Coming soon... Coming soon... Coming soon...
Yocto Kirkstone (kernel 5.15.60) Coming soon... Coming soon... Coming soon...
Yocto Hardknott (kernel 5.10.72) Coming soon... Coming soon... Coming soon...
Yocto Hardknott (kernel 5.10.52) Coming soon... Coming soon... Coming soon...
Yocto Hardknott (kernel 5.10.35) Coming soon... Coming soon... Coming soon...
Yocto Gatesgarth (kernel 5.10.9) Coming soon... Coming soon... Coming soon...
Yocto Zeus (kernel 5.4.70_2.3.2) Coming soon... Coming soon... Coming soon...
Yocto Zeus (kernel 5.4.70_2.3.0)

uboot-imx (imx_v2020.04_5.4.70_2.3.0_var01)

  1. imx8mp_var_dart: fix board_id detect for VAR-SOM-MX8M-PLUS 2.0
  2. imx8mp_var_som: add support for booting 1.x device trees
  3. imx8mp_var_som: add support for MaxLinear mxl8611x Ethernet PHY
  4. imx8mp_var_dart: add missing gpio_free for BOARD_DETECT_GPIO
  5. variscite: imx8_eeprom.h: add support for major and minor som revision
  6. variscite: eth: Add support for MXL611x ethernet phy
  7. net: phy: mxl-8611x: fix ethernet-phy node handle
  8. net: phy: mxl-8611x: fix compile warnings
  9. net: phy: mxl-8611x: configure rgmii rx clock delay
  10. phy: mxl-8611x: add driver for MaxLinear mxl-8611x PHYs
  11. dt-bindings: add device tree bindings and includes for mxl-8611x PHY

linux-imx (imx_5.4.70_2.3.0_var01)

  1. imx8mp-var-som: add support for VAR-SOM-MX8M-PLUS 2.0
  2. net: phy: mxl-8611: backport: replace phy_lock_mdio_bus with mutex_lock
  3. net: phy: mxl-8611: backport: drop support for MXL86111
  4. arm64: configs: imx8_var_defconfig: enable CONFIG_MAXLINEAR_8611X_PHY
  5. net:phy: mxl-8611x: configure rgmii rx clock delay
  6. dt-bindings: net: add bindings for MaxLinear MXL8611x PHY driver
  7. net:phy: mxl-8611x: use device tree properties to configure LEDs
  8. net: phy: mxl-8611: add support for MaxLinear MxL86110x/MxL86111x

meta-variscite-imx

  1. linux-variscite: update to latest
  2. u-boot-variscite: update to latest
  3. imx8mp-var-dart: add nxpiw612-sdio to MACHINE_FEATURES
  4. imx8mp-var-dart: add VAR-SOM-MX8M-PLUS 1.x device tree files
  5. bluez5: add iw61x bluetooth initialization
  6. bcm43xx-utils: add support for iw61x wlan
  7. variscite: conditionally add iw61x support to images
  8. linux-firmware: add 18.99.2.p19.17 nxpiw612-sdio firmware package
  9. kernel-module-nxp-wlan: add iw61x driver based on lf-6.1.36_2.1.0
Android 14.0.0_1.0.0 (kernel 6.1.55) uboot-imx (lf_v2023.04_android-14.0.0_1.0.0_var01)
  1. Supported by initial release
linux-imx (android-14.0.0_1.0.0-var01)
  1. Supported by initial release
MX6x-android (android-14.0.0_1.0.0-var01)
  1. Supported by initial release
Android 13.0.0_1.0.0 (kernel 5.15.71) Coming soon... Coming soon... Coming soon...
Android 12.0.0_1.0.0 (kernel 5.10.72) Coming soon... Coming soon... Coming soon...
Android 11.0.0_2.6.0 (kernel 5.10.72) Coming soon... Coming soon... Coming soon...
Android 11.0.0_2.2.0 (kernel 5.10.35) Coming soon... Coming soon... Coming soon...
Android 11.0.0_1.2.0 (kernel 5.4.70) Coming soon... Coming soon... Coming soon...
Android 10.0.0_2.6.0 (kernel 5.4.70) Coming soon... Coming soon... Coming soon...
Bullseye (kernel 5.10.52_2.1.0) Coming soon... Coming soon... Coming soon...
Bullseye (kernel 5.4.70_2.3.2) Coming soon... Coming soon... Coming soon...
Bullseye (kernel 5.4.70_2.3.0) Coming soon... Coming soon... Coming soon...
Boot2Qt Kirkstone (Qt 6.4.3, kernel 5.15.60) Coming soon... Coming soon... Coming soon...
Boot2Qt Hardknott (Qt 6.2.4, kernel 5.10.72) Coming soon... Coming soon... Coming soon...
Boot2Qt Zeus (Qt 5.15.2, kernel 5.4.70_2.3.2) Coming soon... Coming soon... Coming soon...


VAR-SOM-MX8M-PLUS V1.3

Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer Old MPN New Manufacturer New MPN
Qualcomm AR8033-AL1A-R /
AR8033-AL1B-R
Analog Devices Inc ADIN1300BCPZ

Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release U-Boot Kernel
Yocto Hardknott / Debian Bullseye (kernel 5.10.52) 1) imx8mp-var-dart: enable CONFIG_DM_ETH_PHY for ADIN1300 phy
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
imx8_var_defconfig: enable driver for ADIN PHY
Yocto Hardknott (kernel 5.10.35) 1) imx8mp-var-dart: enable CONFIG_DM_ETH_PHY for ADIN1300 phy
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
imx8_var_defconfig: enable driver for ADIN PHY
Yocto Gatesgarth (kernel 5.10.9) variscite: eth: ADIN1300: Disable RGMII RX clock delay imx8_var_defconfig: enable driver for ADIN PHY
Yocto Zeus / B2Qt Zeus / Debian Bullseye (kernel 5.4.70_2.3.2) variscite: eth: ADIN1300: Disable RGMII RX clock delay imx8_var_defconfig: enable driver for ADIN PHY
Yocto Zeus / Debian Bullseye (kernel 5.4.70_2.3.0) variscite: eth: ADIN1300: Disable RGMII RX clock delay imx8_var_defconfig: enable driver for ADIN PHY
Yocto Zeus (kernel 5.4.47) variscite: eth: ADIN1300: Disable RGMII RX clock delay imx8_var_defconfig: enable driver for ADIN PHY
Android 11.0.0_2.2.0 1) imx8mp-var-dart: enable CONFIG_DM_ETH_PHY for ADIN1300 phy
2) variscite: eth: ADIN1300: Disable RGMII RX clock delay
imx8_var_android_defconfig: enable driver for ADIN PHY
Android 11.0.0_1.2.0 variscite: eth: ADIN1300: Disable RGMII RX clock delay imx8_var_android_defconfig: enable driver for ADIN PHY
Android 10.0.0_2.6.0 variscite: eth: ADIN1300: Disable RGMII RX clock delay imx8_var_android_defconfig: enable driver for ADIN PHY
Android 10.0.0_2.5.0 variscite: eth: ADIN1300: Disable RGMII RX clock delay imx8_var_android_defconfig: enable driver for ADIN PHY
Note: These patches are backward-compatible with the previous SOM revisions.