Debian Toolchain installation

Warning: This page is designed to be used with a 'release' URL parameter.

This page is using the default release mx8m-debian-bullseye-5.4-2.1.x-v1.4.
To view this page for a specific Variscite SoM and software release, please follow these steps:

1. Visit variwiki.com
2. Select your SoM
3. Select the software release

Debian toolchain installation for out of Debian builds

Installing the toolchain

To install the toolchain, please go through the following steps of the Debian Build Release guide:

1. Setup Development Environment
2. Installing required packages
3. Download Debian archive
4. Deploy/Fetch the sources and components

You will have a development environment from this point, including the toolchain and the packages ready to be used.

The GNU Linux toolchain gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu can be found at ~/debian_imx8mq-var-dart_debian_bullseye/toolchain.

Note: Alternatively, you can download the toolchain directly from the Linaro toolchain binaries archive. Anyway, If you're considering downloading the toolchain directly, please still follow the steps 1 and 2.

Create a sysroot

A sysroot is basically a scaled-downed version of the target's file system to be used on the host. Thus, to create the sysroot, we would first need the full Debian rootfs. Please refer to Setup and build Debian to learn how to build it.

After the rootfs has been built, it should be present at ~/debian_imx8mq-var-dart_debian_bullseye/rootfs. From this point, we can start creating the sysroot:

First, create a temporary copy of the origin rootfs:

$ cd ~/debian_imx8mq-var-dart_debian_bullseye
$ mkdir -p tmp/rootfs
$ sudo cp -ar rootfs/. tmp/rootfs

Next, we need to convert all absolute links to relative ones. The following approach will use the tools chroot and symlinks.

Chroot to the rootfs with the following commands:

$ export ROOTFS_BASE=tmp/rootfs
$ sudo cp variscite/qemu_64bit/qemu-aarch64-static ${ROOTFS_BASE}/usr/bin/qemu-aarch64-static
$ sudo mount -o bind /proc ${ROOTFS_BASE}/proc
$ sudo mount -o bind /dev ${ROOTFS_BASE}/dev
$ sudo mount -o bind /sys ${ROOTFS_BASE}/sys
$ sudo mount -o bind /dev/pts ${ROOTFS_BASE}/dev/pts
$ sudo chroot $ROOTFS_BASE

Once entered, we can now install symlinks and convert the links:

# apt-get install -y symlinks
# symlinks -cr /

and exit:

# exit

Then we need to clean up the mounts (needed for chroot):

$ sudo umount ${ROOTFS_BASE}/dev/pts
$ sudo umount ${ROOTFS_BASE}/sys
$ sudo umount ${ROOTFS_BASE}/dev
$ sudo umount ${ROOTFS_BASE}/proc

Finally, create the sysroot target folder:

$ mkdir -p toolchain/sysroot
$ mkdir -p toolchain/sysroot/usr

And copy a minimal set of the modified rootfs to it:

$ cp -ar tmp/rootfs/lib toolchain/sysroot/
$ cp -ar tmp/rootfs/usr/lib toolchain/sysroot/usr
$ cp -ar tmp/rootfs/usr/include toolchain/sysroot/usr

To clean up, delete the temporary rootfs:

$ sudo rm -rf tmp/rootfs 

The Debian sysroot is now located at ~/debian_imx8mq-var-dart_debian_bullseye/toolchain/sysroot and can be used to cross-compile user space programs on the host.

Notes:

• The Debian build script uses debootstrap to create a minimal Debian Bullseye system and adds the BSP support. Please consider installing extra (dev-)packages to your Debian file system as per your needs.
  To do this, follow the Adding Debian packages guide to learn how to add packages to the rootfs.
• Keeping the sysroot in sync with the rootfs of the target is recommended to avoid issues. Whenever a change has been made to the rootfs, please consider creating a new sysroot as described.