VAR-SOM-MX8X changelog
VAR-SOM-MX8X V1.3
Hardware Changes
Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.
| Old Manufacturer
|
Old MPN
|
New Manufacturer
|
New MPN
|
| Qualcomm
|
AR8033-AL1A-R /
AR8033-AL1B-R
|
Analog Devices Inc
|
ADIN1300BCPZ
|
Software Changes
Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:
| Release
|
U-Boot
|
Kernel
|
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye
(kernel 5.4.142)
|
1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8qxp_var_som: Add support for Analog Devices ADIN1300 PHY
3) imx8qxp_var_som: add phy-reset-duration property to fec1
|
1) imx8_var_defconfig: enable driver for ADIN PHY
2) net: phy: adin: add adi,phy-mode-override property
3) imx8qxp-var-som: configure symphony adi,phy-mode-overide to rgmii
4) imx8qxp-var-som: add phy-reset delays to fec1
|
Yocto Sumo / B2Qt Sumo / Debian Buster
(kernel 4.14.98)
|
1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) gpio: pca953x_gpio: fix DT GPIO flags translation
3) imx8qxp_var_som: fec: define phy-reset-duration and phy-reset-post-delay
4) net: dm: fec: add phy-supply-vselect regulator
5) net: dm: fec: configure phy-supply-vselect regulator for fec2
6) imx8qxp_var_som: add define for CONFIG_FEC_MXC_MDIO_BASE
7) imx8qxp_var_som: enable carrier board phy
|
1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8qxp-var-som: fec: define phy-reset-duration and phy-reset-post-delay
3) net: fec: adin1300_phy_fixup: add property adi,phy-mode-override
4) net: fec: adin1300_phy_fixup: only register fixup once
5) imx8qxp-var-som: configure symphony adi,phy-mode-overide to rgmii
|
Android 11.0.0_1.0.0
(kernel 5.4.47)
|
1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8qxp_var_som: Add support for Analog Devices ADIN1300 PHY
3) imx8qxp_var_som: add phy-reset-duration property to fec1
|
1) imx8_var_android_defconfig: enable driver for ADIN PHY
2) net: phy: adin: add adi,phy-mode-override property
3) imx8qxp-var-som: configure symphony adi,phy-mode-overide to rgmii
4) imx8qxp-var-som: add phy-reset delays to fec1
|
Android 10.0.0_2.5.0
(kernel 5.4.47)
|
1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) imx8qxp_var_som: Add support for Analog Devices ADIN1300 PHY
3) imx8qxp_var_som: add phy-reset-duration property to fec1
|
1) imx8_var_android_defconfig: enable driver for ADIN PHY
2) net: phy: adin: add adi,phy-mode-override property
3) imx8qxp-var-som: configure symphony adi,phy-mode-overide to rgmii
4) imx8qxp-var-som: add phy-reset delays to fec1
|
Android 9.0.0_2.3.4
(kernel 4.14.98)
|
1) variscite: eth: ADIN1300: Disable RGMII RX clock delay
2) gpio: pca953x_gpio: fix DT GPIO flags translation
3) imx8qxp_var_som: fec: define phy-reset-duration and phy-reset-post-delay
4) net: dm: fec: add phy-supply-vselect regulator
5) net: dm: fec: configure phy-supply-vselect regulator for fec2
6) imx8qxp_var_som: add define for CONFIG_FEC_MXC_MDIO_BASE
7) imx8qxp_var_som: enable carrier board phy
|
1) net: fec: register ADIN1300 PHY fixup to configure rgmii
2) imx8qxp-var-som: fec: define phy-reset-duration and phy-reset-post-delay
3) net: fec: adin1300_phy_fixup: add property adi,phy-mode-override
4) net: fec: adin1300_phy_fixup: only register fixup once
5) imx8qxp-var-som: configure symphony adi,phy-mode-overide to rgmii
|
Note: These patches are backward-compatible with the previous SOM revisions.