Debian Platform Customization
From Variscite Wiki
Debian
Documentation
Stretch 9
- Debian 9 - Stretch (released on 06/17/2017)
Documentation is available from wiki.debian.org
VAR-SOM-MX6
Build Results
The resulted images are located in ~/var_som_mx6_debian/output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| uImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.mmc | U-Boot built for SD card or eMMC boot |
| Device Tree name |
Details |
| imx6dl-var-som-solo-cap.dtb | VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with capacitive touch |
| imx6dl-var-som-solo-res.dtb | VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with resistive touch |
| imx6dl-var-som-solo-vsc.dtb | VAR-SOM-SOLO with iMX6S/DL on SOLOCustomBoard with capacitive touch |
| imx6dl-var-som-cap.dtb | VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with capacitive touch |
| imx6dl-var-som-res.dtb | VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with resistive touch |
| imx6dl-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6S/DL on SOLOCustomBoard with capacitive touch |
| imx6q-var-som-cap.dtb | VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with capacitive touch |
| imx6q-var-som-res.dtb | VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with resistive touch |
| imx6q-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6D/Q on SOLOCustomBoard with capacitive touch |
| imx6qp-var-som-cap.dtb | VAR-SOM-MX6 with iMX6DP/QP on MX6CustomBoard with capacitive touch |
| imx6qp-var-som-res.dtb | VAR-SOM-MX6 with iMX6DP/QP on MX6CustomBoard with resistive touch |
| imx6qp-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6DP/QP on SOLOCustomBoard with capacitive touch |
| imx6q-var-dart.dtb | DART-MX6 with iMX6D/Q on DARTCustomBoard with capacitive touch |
DART-6UL
Build Results
The resulted images are located in ~/var_mx6ul_dart_debian/output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| rootfs.ubi.img | Use for flash to NAND |
| zImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.emmc | U-Boot built for SD card or eMMC |
| Device Tree name |
Details |
| imx6ul-var-dart-emmc_wifi.dtb | DART-6UL with eMMC and WiFi enabled. (SD card & NAND disabled) |
| imx6ul-var-dart-nand_wifi.dtb | DART-6UL with l NAND and WiFi enabled. (SD card & eMMC disabled) |
| imx6ul-var-dart-sd_emmc.dtb | DART-6UL with SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card |
| imx6ul-var-dart-sd_nand.dtb | DART-6UL with SD card and NAND enabled (WiFi & eMMC disabled). You can boot from NAND or SD card |
| imx6ul-var-dart-5g-emmc_wifi.dtb | DART-6UL-5G with eMMC and WiFi enabled. (SD card & NAND disabled) |
| imx6ul-var-dart-5g-nand_wifi.dtb | DART-6UL-5G with l NAND and WiFi enabled. (SD card & eMMC disabled) |
| imx6ull-var-dart-emmc_wifi.dtb | DART-6ULL with eMMC and WiFi enabled. (SD card & NAND disabled) |
| imx6ull-var-dart-nand_wifi.dtb | DART-6ULL with l NAND and WiFi enabled. (SD card & eMMC disabled) |
| imx6ull-var-dart-sd_emmc.dtb | DART-6ULL with SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card |
| imx6ull-var-dart-sd_nand.dtb | DART-6ULL with SD card and NAND enabled (WiFi & eMMC disabled). You can boot from NAND or SD card |
| imx6ull-var-dart-5g-emmc_wifi.dtb | DART-6ULL-5G with eMMC and WiFi enabled. (SD card & NAND disabled) |
| imx6ull-var-dart-5g-nand_wifi.dtb | DART-6ULL-5G with l NAND and WiFi enabled. (SD card & eMMC disabled) |
The resulted images are located in ~/var_mx6ul_dart_debian/output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| rootfs.ubi.img | Use for flash to NAND |
| zImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.emmc | U-Boot built for SD card or eMMC |
| Device Tree name |
Details |
| imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ull-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ull-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ull-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ull-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ul-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ul-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ul-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ul-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
| imx6ulz-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
| imx6ulz-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
| imx6ulz-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
| imx6ulz-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
SD card image file tree
/opt/images/
└── Debian
├── imx6ul-var-dart-5g-emmc_wifi.dtb
├── imx6ul-var-dart-5g-nand_wifi.dtb
├── imx6ul-var-dart-emmc_wifi.dtb
├── imx6ul-var-dart-nand_wifi.dtb
├── imx6ul-var-dart-sd_emmc.dtb
├── imx6ul-var-dart-sd_nand.dtb
├── imx6ull-var-dart-5g-emmc_wifi.dtb
├── imx6ull-var-dart-5g-nand_wifi.dtb
├── imx6ull-var-dart-emmc_wifi.dtb
├── imx6ull-var-dart-nand_wifi.dtb
├── imx6ull-var-dart-sd_emmc.dtb
├── imx6ull-var-dart-sd_nand.dtb
├── rootfs.tar.gz
├── rootfs.ubi.img
├── SPL.mmc
├── SPL.nand
├── u-boot.img.mmc
├── u-boot.img.nand
└── zImage
/opt/images/
└── Yocto
├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb
├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb
├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb
├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb
├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb
├── imx6ull-var-som-concerto-board-emmc-wifi.dtb
├── imx6ull-var-som-concerto-board-nand-sd-card.dtb
├── imx6ull-var-som-concerto-board-nand-wifi.dtb
├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb
├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb
├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb
├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb
├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb
├── imx6ul-var-som-concerto-board-emmc-wifi.dtb
├── imx6ul-var-som-concerto-board-nand-sd-card.dtb
├── imx6ul-var-som-concerto-board-nand-wifi.dtb
├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb
├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb
├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb
├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb
├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb
├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb
├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb
├── imx6ulz-var-som-concerto-board-nand-wifi.dtb
├── rootfs.tar.gz
├── rootfs.ubi.img
├── SPL.mmc
├── SPL.nand
├── u-boot.img.mmc
├── u-boot.img.nand
└── zImage
VAR-SOM-MX7
Build Results
The resulted images are located in ~/var_mx7_var_som_debian/output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| rootfs.ubi.img | Use for flash to nand |
| zImage | Linux kernel image |
| SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
| SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
| u-boot.img.nand | U-Boot built for NAND flash |
| u-boot.img.emmc | U-Boot built for SD card or eMMC boot |
| Device Tree name |
Details |
| imx7d-var-som-emmc.dtb | Boot from SD or eMMC |
| imx7d-var-som-nand.dtb | Boot from NAND |
| imx7d-var-som-emmc-m4.dtb | Boot from SD or eMMC with M4 support |
| imx7d-var-som-nand-m4.dtb | Boot from NAND with M4 support |
DART-MX8M
Build Results
The resulted images are located in ~/var_mx8m_dart_debian/output/.
| Image name |
How to use |
|---|---|
| rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
| Image.gz | Linux kernel image |
| imx-boot-sd.bin | U-Boot built for SD card and eMMC |
| Device Tree name |
Details |
| fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb | DART-MX8M with HDMI+LVDS, eMMC and WiFi (SD card disabled) |
| fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb | DART-MX8M with HDMI, eMMC and WiFi (SD card disabled) |
| fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb | DART-MX8M with LVDS, eMMC and WiFi (SD card disabled) |
| fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb | DART-MX8M with HDMI+LVDS, eMMC and SD (WiFi card disabled) |
| fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb | DART-MX8M with HDMI, eMMC and SD (WiFi card disabled) |
| fsl-imx8mq-var-dart-sd-emmc-lvds.dtb | DART-MX8M with LVDS, eMMC and SD (WiFi card disabled) |
Platform Customizations
VAR-SOM-MX6
stretch-4.9.11-mx6-v1.0
- RELEASE_NAME = stretch-4.9.11-mx6-v1.0
- RELEASE_LINK = RELEASE_STRETCH_V1.0_VAR-SOM-MX6
- DEBIAN_NAME = Stretch
- DEBIAN_VERSION = 9.3
- RECOVERY_SD_NAME = stretch-4.9.11-mx6-v1.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/debian
- RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTaKepnaAwm1umGw59L0ukHEa6VIIlEM9btCiWaXW0jx3nOQmwJ3h2QxyBbH2nMEwmDC_GvFbowtonR/pubhtml
- MACHINE_NAME = var-som-mx6
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
- KERNEL_IMAGE = uImage
- KERNEL_DEFCONFIG = imx_v7_var_defconfig
- KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
- U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
- U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
- SPL_SD_IMAGE_NAME = SPL-sd
- SPL_NAND_IMAGE_NAME = SPL-nand
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_stretch_mx6_var01
- DEBIAN_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
- DEBIAN_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
- KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
- SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
- DEBIAN_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
- EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
- EMMC_ROOTFS_DEV = mmcblk0
- EMMC_ROOTFS_PARTITION_NUM = p1
- NAND_ROOTFS_DEV = mtd3
- RAM_LOAD_ADDRESS = 0x18100000
- UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
- UBOOT_PAD_SIZE = 0x1e0000
- KERNEL_PAD_SIZE = 0x800000
- DTB_START_ADDRESS = 0x3e0000
stretch-4.9.88-mx6-v2.0
- RELEASE_NAME = stretch-4.9.88-mx6-v2.0
- RELEASE_LINK = RELEASE_STRETCH_V2.0_VAR-SOM-MX6
- DEBIAN_NAME = Stretch
- DEBIAN_VERSION = 9.5
- RECOVERY_SD_NAME = stretch-4.9.88-mx6-v2.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/debian
- RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTaKepnaAwm1umGw59L0ukHEa6VIIlEM9btCiWaXW0jx3nOQmwJ3h2QxyBbH2nMEwmDC_GvFbowtonR/pubhtml
- MACHINE_NAME = var-som-mx6
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
- KERNEL_IMAGE = uImage
- KERNEL_DEFCONFIG = imx_v7_var_defconfig
- KERNEL_BUILD_PARAMS = LOADADDR=0x10008000
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = mx6var_som_sd_defconfig
- U-BOOT_NAND_DEFCONFIG = mx6var_som_nand_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
- U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
- SPL_SD_IMAGE_NAME = SPL-sd
- SPL_NAND_IMAGE_NAME = SPL-nand
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_stretch_mx6_var02
- DEBIAN_BUILD_RESULTS_SECTION = VAR-SOM-MX6_BUILD_RESULTS
- DEBIAN_BOOT_BOARD_SECTION = VAR-SOM-MX6_BOOT_BOARD
- KERNEL_DTB_SECTION = VAR-SOM-MX6_DTB
- SD_TREE_SECTION = VAR-SOM-MX6_SD_TREE
- DEBIAN_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX6_FLASH_SD_FROM_GUI
- EMMC_FAT_PARTITION_NAME = BOOT-VARMX6
- EMMC_ROOTFS_DEV = mmcblk0
- EMMC_ROOTFS_PARTITION_NUM = p1
- NAND_ROOTFS_DEV = mtd3
- RAM_LOAD_ADDRESS = 0x18100000
- UBOOT_CONFIG_FILE = include/configs/mx6var_som.h
- UBOOT_PAD_SIZE = 0x1e0000
- KERNEL_PAD_SIZE = 0x800000
- DTB_START_ADDRESS = 0x3e0000
DART-6UL
stretch-4.9.11-mx6ul-v1.0
- RELEASE_NAME = stretch-4.9.11-mx6ul-v1.0
- RELEASE_LINK = RELEASE_STRETCH_V1.0_DART-6UL
- DEBIAN_NAME = Stretch
- DEBIAN_VERSION = 9.3
- RECOVERY_SD_NAME = stretch-4.9.11-mx6ul-v1.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/debian
- RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTUPjdt-nbNyWUFxjrkoIw4H-s1h5Uo3HYgYQvzHgL1SMIutt7fzGm1zq5vgwLQhNAb7fTqETSjBn2J/pubhtml
- MACHINE_NAME = imx6ul-var-dart
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
- KERNEL_IMAGE = zImage
- KERNEL_DEFCONFIG = imx_v7_var_defconfig
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
- U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
- U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
- SPL_SD_IMAGE_NAME = SPL-sd
- SPL_NAND_IMAGE_NAME = SPL-nand
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_stretch_mx6ul_var01
- DEBIAN_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
- DEBIAN_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
- KERNEL_DTB_SECTION = DART-6UL_DTB_STRETCH_PLUS
- SD_TREE_SECTION = DART-6UL_SD_TREE
- EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
- EMMC_ROOTFS_DEV = mmcblk1
- EMMC_ROOTFS_PARTITION_NUM = p2
- NAND_ROOTFS_DEV = mtd4
- RAM_LOAD_ADDRESS = 0x83100000
- UBOOT_PAD_SIZE = 0x200000
- KERNEL_PAD_SIZE = 0x7e0000
- KERNEL_START_ADDRESS = 0xde0000
- DTB_START_ADDRESS = 0xde0000
stretch-4.9.88-mx6ul-v2.0
- RELEASE_NAME = stretch-4.9.88-mx6ul-v2.0
- RELEASE_LINK = RELEASE_STRETCH_V2.0_DART-6UL
- DEBIAN_NAME = Stretch
- DEBIAN_VERSION = 9.3
- RECOVERY_SD_NAME = stretch-4.9.88-mx6ul-v2.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/debian
- RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTUPjdt-nbNyWUFxjrkoIw4H-s1h5Uo3HYgYQvzHgL1SMIutt7fzGm1zq5vgwLQhNAb7fTqETSjBn2J/pubhtml
- MACHINE_NAME = imx6ul-var-dart
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
- KERNEL_IMAGE = zImage
- KERNEL_DEFCONFIG = imx_v7_var_defconfig
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
- U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
- U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
- SPL_SD_IMAGE_NAME = SPL-sd
- SPL_NAND_IMAGE_NAME = SPL-nand
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_stretch_mx6ul_var02
- DEBIAN_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS
- DEBIAN_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
- KERNEL_DTB_SECTION = DART-6UL_DTB_STRETCH_PLUS
- SD_TREE_SECTION = DART-6UL_SD_TREE
- EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
- EMMC_ROOTFS_DEV = mmcblk1
- EMMC_ROOTFS_PARTITION_NUM = p2
- NAND_ROOTFS_DEV = mtd4
- RAM_LOAD_ADDRESS = 0x83100000
- UBOOT_PAD_SIZE = 0x200000
- KERNEL_PAD_SIZE = 0x7e0000
- KERNEL_START_ADDRESS = 0xde0000
- DTB_START_ADDRESS = 0xde0000
stretch-4.14.78-mx6ul-v1.0
- RELEASE_NAME = stretch-4.14.78-mx6ul-v1.0
- RELEASE_LINK = RELEASE_STRETCH_V3.0_DART-6UL
- DEBIAN_NAME = Stretch
- DEBIAN_VERSION = 9.3
- RECOVERY_SD_NAME = stretch-4.14.78-mx6ul-v1.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-6UL/Software/debian
- RELEASE_NOTES_LINK = '
- MACHINE_NAME = imx6ul-var-dart
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
- KERNEL_IMAGE = zImage
- KERNEL_DEFCONFIG = imx_v7_var_defconfig
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = mx6ul_var_dart_mmc_defconfig
- U-BOOT_NAND_DEFCONFIG = mx6ul_var_dart_nand_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
- U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
- SPL_SD_IMAGE_NAME = SPL-sd
- SPL_NAND_IMAGE_NAME = SPL-nand
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_stretch_mx6ul_var03
- DEBIAN_BUILD_RESULTS_SECTION = DART-6UL_BUILD_RESULTS_STRETCH_V3_PLUS
- DEBIAN_BOOT_BOARD_SECTION = DART-6UL_BOOT_BOARD
- KERNEL_DTB_SECTION = DART-6UL_DTB_STRETCH_PLUS
- SD_TREE_SECTION = DART-6UL_SD_TREE_STRETCH_V3_PLUS
- EMMC_FAT_PARTITION_NAME = BOOT-VAR6UL
- EMMC_ROOTFS_DEV = mmcblk1
- EMMC_ROOTFS_PARTITION_NUM = p2
- NAND_ROOTFS_DEV = mtd4
- RAM_LOAD_ADDRESS = 0x83100000
- UBOOT_PAD_SIZE = 0x200000
- KERNEL_PAD_SIZE = 0x7e0000
- KERNEL_START_ADDRESS = 0xde0000
- DTB_START_ADDRESS = 0xde0000
VAR-SOM-MX7
stretch-4.9.11-mx7-v1.0
- RELEASE_NAME = stretch-4.9.11-mx7-v1.0
- RELEASE_LINK = RELEASE_STRETCH_V1.0_VAR-SOM-MX7
- DEBIAN_NAME = Stretch
- DEBIAN_VERSION = 9.3
- RECOVERY_SD_NAME = stretch-4.9.11-mx7-v1.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/debian
- RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTHNiQATuLGEsjNKtjysSOV0eyi9UznbvtR-32fJjIeMUbfN0HA-O5v3v6n66_gbWZhL-fVS5dZG4Eq/pubhtml
- MACHINE_NAME = imx7-var-som
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.9.11_1.0.0_ga-var01
- KERNEL_IMAGE = zImage
- KERNEL_DEFCONFIG = imx_v7_var_defconfig
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
- U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.imx-sd
- U-BOOT_NAND_IMAGE_NAME = u-boot.imx-nand
- SPL_SD_IMAGE_NAME = N/A
- SPL_NAND_IMAGE_NAME = N/A
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_stretch_mx7_var01
- DEBIAN_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
- DEBIAN_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
- KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
- SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE
- DEBIAN_FLASH_SD_FROM_GUI_SECTION = VAR-SOM-MX7_FLASH_SD_FROM_GUI
- READ_ONLY_ROOTFS = '
- EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
- EMMC_ROOTFS_DEV = mmcblk2
- EMMC_ROOTFS_PARTITION_NUM = p2
- NAND_ROOTFS_DEV = mtd4
- RAM_LOAD_ADDRESS = 0x83100000
- UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
- KERNEL_PAD_SIZE = 0x7e0000
- KERNEL_START_ADDRESS = 0x600000
- DTB_START_ADDRESS = 0xde0000
stretch-4.9.88-mx7-v2.0
- RELEASE_NAME = stretch-4.9.88-mx7-v2.0
- RELEASE_LINK = RELEASE_STRETCH_V2.0_VAR-SOM-MX7
- DEBIAN_NAME = Stretch
- DEBIAN_VERSION = 9.3
- RECOVERY_SD_NAME = stretch-4.9.88-mx7-v2.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX7/Software/debian
- RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTHNiQATuLGEsjNKtjysSOV0eyi9UznbvtR-32fJjIeMUbfN0HA-O5v3v6n66_gbWZhL-fVS5dZG4Eq/pubhtml
- MACHINE_NAME = imx7-var-som
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.9.88_2.0.0_ga-var01
- KERNEL_IMAGE = zImage
- KERNEL_DEFCONFIG = imx_v7_var_defconfig
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2017.03_4.9.11_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = mx7dvar_som_defconfig
- U-BOOT_NAND_DEFCONFIG = mx7dvar_som_nand_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
- U-BOOT_NAND_IMAGE_NAME = u-boot.img-nand
- SPL_SD_IMAGE_NAME = SPL-sd
- SPL_NAND_IMAGE_NAME = SPL-nand
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_stretch_mx7_var02
- DEBIAN_BUILD_RESULTS_SECTION = VAR-SOM-MX7_BUILD_RESULTS
- DEBIAN_BOOT_BOARD_SECTION = VAR-SOM-MX7_BOOT_BOARD
- KERNEL_DTB_SECTION = VAR-SOM-MX7_DTB
- SD_TREE_SECTION = VAR-SOM-MX7_SD_TREE
- EMMC_FAT_PARTITION_NAME = BOOT-VARMX7
- EMMC_ROOTFS_DEV = mmcblk2
- EMMC_ROOTFS_PARTITION_NUM = p2
- NAND_ROOTFS_DEV = mtd4
- RAM_LOAD_ADDRESS = 0x83100000
- UBOOT_CONFIG_FILE = include/configs/mx7dvar_som.h
- KERNEL_PAD_SIZE = 0x7e0000
- KERNEL_START_ADDRESS = 0x600000
- DTB_START_ADDRESS = 0xde0000
DART-MX8M
stretch-4.14.78-mx8m-v1.0
- RELEASE_NAME = stretch-4.14.78-mx8m-v1.0
- RELEASE_LINK = RELEASE_STRETCH_V1.0_DART-MX8M
- DEBIAN_NAME = Stretch
- DEBIAN_VERSION = 9.8
- RECOVERY_SD_NAME = stretch-4.14.78-mx8m-v1.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M/Software/debian
- RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/d/e/2PACX-1vTUPjdt-nbNyWUFxjrkoIw4H-s1h5Uo3HYgYQvzHgL1SMIutt7fzGm1zq5vgwLQhNAb7fTqETSjBn2J/pubhtml
- MACHINE_NAME = imx8m-var-dart
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
- KERNEL_IMAGE = zImage
- KERNEL_DEFCONFIG = imx8_var_defconfig
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = imx8m_var_dart_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_stretch_mx8m_var01
- DEBIAN_BUILD_RESULTS_SECTION = DART-MX8M_BUILD_RESULTS
- DEBIAN_BOOT_BOARD_SECTION = DART-MX8M_BOOT_BOARD
- KERNEL_DTB_SECTION = DART-MX8M_DTB_STRETCH_PLUS
- SD_TREE_SECTION = DART-MX8M_SD_TREE_STRETCH_PLUS
- EMMC_FAT_PARTITION_NAME = BOOT-VAR8M
- EMMC_ROOTFS_DEV = mmcblk2
- EMMC_ROOTFS_PARTITION_NUM = p2
- RAM_LOAD_ADDRESS = 0x83100000
- UBOOT_PAD_SIZE = 0x200000
- KERNEL_PAD_SIZE = 0x7e0000
- KERNEL_START_ADDRESS = 0xde0000
- DTB_START_ADDRESS = 0xde0000
DART-MX8M-MINI
buster-4.14.78-mx8mm-v1.0
- RELEASE_NAME = buster-4.14.78-mx8mm-v1.0
- RELEASE_LINK = RELEASE_BUSTER_V1.0_DART-MX8MM
- DEBIAN_NAME = Buster
- DEBIAN_VERSION = 10
- RECOVERY_SD_NAME = buster-4.14.78-mx8mm-v1.0.img.gz
- RECOVERY_SD_URL = ftp://customerv:Variscite1@ftp.variscite.com/DART-MX8M-MINI/Software/debian
- RELEASE_NOTES_LINK = https://docs.google.com/spreadsheets/u/1/d/e/2PACX-1vRSuSjOYHfWyX_zVbD3Srs7e2FqAh2UE5_E0UzbzASlzhWYWq5jxwNXxu6tKaGWCAD4BTZjRS9oxtQx/pubhtml
- MACHINE_NAME = imx8mm-var-dart
- KERNEL_GIT = https://github.com/varigit/linux-imx.git
- KERNEL_BRANCH = imx_4.14.78_1.0.0_ga_var01
- KERNEL_IMAGE = zImage
- KERNEL_DEFCONFIG = imx8_var_defconfig
- U-BOOT_GIT = https://github.com/varigit/uboot-imx.git
- U-BOOT_BRANCH = imx_v2018.03_4.14.78_1.0.0_ga_var01
- U-BOOT_SD_DEFCONFIG = imx8mm_var_dart_defconfig
- U-BOOT_SD_IMAGE_NAME = u-boot.img-sd
- DEBIAN_GIT = https://github.com/varigit/debian-var.git
- DEBIAN_BRANCH = debian_buster_var01
- DEBIAN_BUILD_RESULTS_SECTION = DART-MX8MM_BUILD_RESULTS
- DEBIAN_BOOT_BOARD_SECTION = DART-MX8MM_BOOT_BOARD
- KERNEL_DTB_SECTION = DART-MX8MM_DTB_STRETCH_PLUS
- SD_TREE_SECTION = DART-MX8MM_SD_TREE_STRETCH_PLUS
- EMMC_FAT_PARTITION_NAME = BOOT-VAR8M
- EMMC_ROOTFS_DEV = mmcblk2
- EMMC_ROOTFS_PARTITION_NUM = p2
- RAM_LOAD_ADDRESS = 0x83100000
- UBOOT_PAD_SIZE = 0x200000
- KERNEL_PAD_SIZE = 0x7e0000
- KERNEL_START_ADDRESS = 0xde0000
- DTB_START_ADDRESS = 0xde0000