VAR-SOM-MX6 Yocto NAND Recovery V60plus

Variscite provides a recovery SD card image that can be used to install the pre-built U-Boot, Linux kernel and the file system into the internal storage/s of the SOM.

Preparing a recovery SD card

Download mx6-som-recovery-sd.vXX.img.gz (latest) which is available on Variscite's FTP: ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/
Plug-in the SD card to your Linux HOST PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)

$ gunzip mx6-som-recovery-sd.vXX.img.gz
$ sudo umount /dev/sdX*
$ sudo dd if=mx6-som-recovery-sd.vXX.img of=/dev/sdX bs=1M

(Replace /dev/sdX with your actual device)

Recover NAND Flash/eMMC

Power-off the board.
Insert the SD card into the SD card slot of the carrier board (DVK)
Press and hold the boot-select button, and power-on the board while button is pressed
The board will automatically boot into Linux from SD card

Flash from GUI

Click the appropriate button:

Yocto Jethro SOLOCB NAND: Flash Yocto on NAND flash, on VAR-SOLOCUSTOMBOARD
Yocto Jethro SOLOCB eMMC: Flash Yocto on eMMC, on VAR-SOLOCUSTOMBOARD
Yocto Jethro MX6CB Res NAND: Flash Yocto with Resistive touch panel support on NAND flash, on VAR-MX66CUSTOMBOARD
Yocto Jethro MX6CB Cap NAND: Flash Yocto with Capacitive touch panel support on NAND flash, on VAR-MX66CUSTOMBOARD
Yocto Jethro MX6CB Res eMMC: Flash Yocto with Resistive touch panel support on eMMC, on VAR-MX66CUSTOMBOARD
Yocto Jethro MX6CB Cap eMMC: Flash Yocto with Capacitive touch panel support on eMMC, on VAR-MX66CUSTOMBOARD.
Yocto Jethro DART (eMMC): Flash Yocto on eMMC, on DART-BOARD
Android SOLOCustomBoard eMMC: Flash Yocto on eMMC, on VAR-SOLOCUSTOMBOARD
Android MX6CB Cap: Flash Yocto with Capacitive touch panel support on eMMC, on VAR-MX66CUSTOMBOARD
Android MX6CB Res: Flash Yocto with Resistive touch panel support on eMMC, on VAR-MX66CUSTOMBOARD
Android DART: Flash Yocto on eMMC, on DART-BOARD

Flash from command line

Login as root (no password)
From Linux command line, type one of flash options

$ install_android.sh	- Flash Android into eMMC (Follow instructions)
$ install_yocto.sh	- Flash Yocto into eMMC or NAND Flash (Follow instructions)

SD card image file tree

/opt/images/
├── Android
│   ├── SPL
│   ├── SPL.mmc
│   ├── boot-imx6q-var-dart.img
│   ├── boot-som-mx6dl-c.img
│   ├── boot-som-mx6dl-r.img
│   ├── boot-som-mx6q-c.img
│   ├── boot-som-mx6q-r.img
│   ├── boot-som-mx6q-vsc.img
│   ├── boot-som-solo-c.img
│   ├── boot-som-solo-r.img
│   ├── boot-som-solo-vsc.img
│   ├── boot.img
│   ├── recovery-imx6q-var-dart.img
│   ├── recovery-som-mx6dl-c.img
│   ├── recovery-som-mx6dl-r.img
│   ├── recovery-som-mx6q-c.img
│   ├── recovery-som-mx6q-r.img
│   ├── recovery-som-mx6q-vsc.img
│   ├── recovery-som-solo-c.img
│   ├── recovery-som-solo-r.img
│   ├── recovery-som-solo-vsc.img
│   ├── recovery.img
│   ├── system.img
│   ├── u-boot-var-imx6-nand.img
│   └── u-boot-var-imx6-sd.img
└── Yocto
    ├── SPL
    ├── SPL.mmc
    ├── rootfs.tar.bz2
    ├── rootfs.ubi.img
    ├── u-boot.img
    ├── u-boot.img.mmc
    ├── uImage
    ├── uImage-imx6dl-var-som-cap.dtb
    ├── uImage-imx6dl-var-som-res.dtb
    ├── uImage-imx6dl-var-som-solo-cap.dtb
    ├── uImage-imx6dl-var-som-solo-res.dtb
    ├── uImage-imx6dl-var-som-solo-vsc.dtb
    ├── uImage-imx6dl-var-som-vsc.dtb
    ├── uImage-imx6q-var-dart.dtb
    ├── uImage-imx6q-var-som-cap.dtb
    ├── uImage-imx6q-var-som-res.dtb
    └── uImage-imx6q-var-som-vsc.dtb

The install_android.sh & install_yocto.sh script files are located at /usr/bin/