VAR-SOM-MX6 GSTREAM JETHRO
From Variscite Wiki
VAR-SOM-MX6 - Streaming Video
Under construction!!!
Stream Camera with imxcamera application
On your host machine install Video Lan VLC VideoLan
- Find out your host IP address (Windows:ipconfig, Linux:ifconfig)
- Start VLC, Media->Open Network Stream. Set the URL to "rtp://@:5004" and press "Play".
- On target, start the imxcamera application.
- Press the Settings button. Select "Enable RTP" box and set the IP to you host machine. Press OK.
- Press the Camera button to get a Video camera Image.
- Press the blue button and the camera will be streamed to you host VLC.
Introduction to GStreamer
GStreamer
GStreamer is a powerful pipeline-based multimedia framework.
GStreamer allows a programmer to create a variety of media-handling components, including simple audio playback, audio and video playback, recording, streaming and editing. This is not a GStreamer reference manual but an overview for using it on Variscite i.MX6 products.
Major GStreamer commands
There are two major commands:
gst-inspect - allows you to to get documentation on available elements and detailed information on a specific element.
gst-launch - allows you to create and execute GStreamer pipelines.
gst-inspect
Lists all available elements:
$ gst-inspect-1.0
Lists all available i.MX6 specific elements:
$ gst-inspect-1.0 | grep imx
For example:
root@var-som-mx6:~# gst-inspect-1.0 | grep imx aiur.imx: webm: [Invalid UTF-8] 8\x91\xddq aiur.imx: aiurdemux: Aiur universal demuxer vpu.imx: vpuenc_h264: VPU-based AVC/H264 video encoder vpu.imx: vpuenc_mpeg4: VPU-based MPEG4 video encoder vpu.imx: vpuenc_h263: VPU-based H263 video encoder vpu.imx: vpuenc_jpeg: VPU-based JPEG video encoder vpu.imx: vpudec: VPU-based video decoder overlaysink.imx: overlaysink: IMX Video (video compositor) Sink imxvideoconvert.imx: imxvideoconvert_ipu: IMX ipu Video Converter imxvideoconvert.imx: imxvideoconvert_g2d: IMX g2d Video Converter imxv4l2.imx: imxv4l2sink: IMX Video (video4linux2) Sink imxv4l2.imx: imxv4l2src: IMX Video (video4linux2) Source beep.imx: ac3: [Invalid UTF-8] 4J\xa0t beep.imx: 3ca: [Invalid UTF-8] 4J\xa0t beep.imx: beepdec: Beep universal decoder imxcompositor.imx: imxcompositor_ipu: IMX ipu Video Compositor imxcompositor.imx: imxcompositor_g2d: IMX g2d Video Compositor imxmp3enc.imx: imxmp3enc: imx mp3 audio encoder
Detailed help information on a specific element:
$ gst-inspect-1.0 imxv4l2sink
For example:
root@var-som-mx6:~# gst-inspect-1.0 imxv4l2sink
====== IMXV4L2SINK: 4.0.9 build on Aug 8 2016 12:47:08. ======
Factory Details:
Rank primary + 1 (257)
Long-name IMX Video (video4linux2) Sink
Klass Sink/Video
Description Displays frames on IMX SoC video4linux2 device
Author Multimedia Team <shmmmw@freescale.com>
Plugin Details:
Name imxv4l2.imx
Description IMX SoC v4l2-based video source/sink
Filename /usr/lib/gstreamer-1.0/libgstimxv4l2plugins.so
Version 4.0.9
License LGPL
Source module imx-gst1.0-plugin
Binary package Freescle Gstreamer Multimedia Plugins
Origin URL http://www.freescale.com
GObject
+----GInitiallyUnowned
+----GstObject
+----GstElement
+----GstBaseSink
+----GstVideoSink
+----GstImxV4l2Sink
Implemented Interfaces:
GstVideoOverlay
Pad Templates:
SINK template: 'sink'
Availability: Always
Capabilities:
video/x-raw
format: { RGB16, BGR, RGB, RGBx, BGRx, NV12, UYVY, YUY2, Y42B, I420, YV12, TNVP, TNVF, Y444 }
width: [ 1, 2147483647 ]
height: [ 1, 2147483647 ]
framerate: [ 0/1, 2147483647/1 ]
video/x-raw(memory:SystemMemory, meta:GstVideoOverlayComposition)
format: { RGB16, BGR, RGB, RGBx, BGRx, NV12, UYVY, YUY2, Y42B, I420, YV12, TNVP, TNVF, Y444 }
width: [ 1, 2147483647 ]
height: [ 1, 2147483647 ]
framerate: [ 0/1, 2147483647/1 ]
Element Flags:
no flags set
Element Implementation:
Has change_state() function: 0x76a0b808
Element has no clocking capabilities.
Element has no URI handling capabilities.
Pads:
SINK: 'sink'
Pad Template: 'sink'
Element Properties:
name : The name of the object
flags: readable, writable
String. Default: "imxv4l2sink0"
parent : The parent of the object
flags: readable, writable
Object of type "GstObject"
sync : Sync on the clock
flags: readable, writable
Boolean. Default: true
max-lateness : Maximum number of nanoseconds that a buffer can be late before it is dropped (-1 unlimited)
flags: readable, writable
Integer64. Range: -1 - 9223372036854775807 Default: 20000000
qos : Generate Quality-of-Service events upstream
flags: readable, writable
Boolean. Default: true
async : Go asynchronously to PAUSED
flags: readable, writable
Boolean. Default: true
ts-offset : Timestamp offset in nanoseconds
flags: readable, writable
Integer64. Range: -9223372036854775808 - 9223372036854775807 Default: 0
enable-last-sample : Enable the last-sample property
flags: readable, writable
Boolean. Default: true
last-sample : The last sample received in the sink
flags: readable
Boxed pointer of type "GstSample"
blocksize : Size in bytes to pull per buffer (0 = default)
flags: readable, writable
Unsigned Integer. Range: 0 - 4294967295 Default: 4096
render-delay : Additional render delay of the sink in nanoseconds
flags: readable, writable
Unsigned Integer64. Range: 0 - 18446744073709551615 Default: 0
throttle-time : The time to keep between rendered buffers (0 = disabled)
flags: readable, writable
Unsigned Integer64. Range: 0 - 18446744073709551615 Default: 0
max-bitrate : The maximum bits per second to render (0 = disabled)
flags: readable, writable
Unsigned Integer64. Range: 0 - 18446744073709551615 Default: 0
show-preroll-frame : Whether to render video frames during preroll
flags: readable, writable
Boolean. Default: true
device : Device location
flags: readable, writable
String. Default: "/dev/video17"
overlay-top : The topmost (y) coordinate of the video overlay; top left corner of screen is 0,0
flags: readable, writable
Integer. Range: -2147483648 - 2147483647 Default: 0
overlay-left : The leftmost (x) coordinate of the video overlay; top left corner of screen is 0,0
flags: readable, writable
Integer. Range: -2147483648 - 2147483647 Default: 0
overlay-width : The width of the video overlay; default is equal to screen width
flags: readable, writable
Unsigned Integer. Range: 0 - 4294967295 Default: 0
overlay-height : The height of the video overlay; default is equal to screen height
flags: readable, writable
Unsigned Integer. Range: 0 - 4294967295 Default: 0
crop-top : The topmost (y) coordinate of the video crop; top left corner of image is 0,0
flags: readable, writable
Unsigned Integer. Range: 0 - 2147483647 Default: 0
crop-left : The leftmost (x) coordinate of the video crop; top left corner of image is 0,0
flags: readable, writable
Unsigned Integer. Range: 0 - 2147483647 Default: 0
crop-width : The width of the video crop; default is equal to negotiated image width
flags: readable, writable
Unsigned Integer. Range: 0 - 2147483647 Default: 0
crop-height : The height of the video crop; default is equal to negotiated image height
flags: readable, writable
Unsigned Integer. Range: 0 - 2147483647 Default: 0
rotate : The orientation degree of the video; default is 0 degree
flags: readable, writable
Unsigned Integer. Range: 0 - 4294967295 Default: 0
force-aspect-ratio : When enabled, scaling will respect original aspect ratio
flags: readable, writable
Boolean. Default: false
deinterlace : set deinterlace enabled; can't be configed on fly
flags: readable, writable
Boolean. Default: true
motion : The interlace motion setting: 0 - low motion, 1 - medium motion, 2 - high motion.
flags: readable, writable
Unsigned Integer. Range: 0 - 2 Default: 2
reconfig : Change V4L2 configuration while running; overlay position/size/rotation changed.
flags: readable, writable
Boolean. Default: false
composition-meta-enable: Enable overlay composition meta processing
flags: readable, writable
Boolean. Default: false
gst-launch
For Example launch the camera and display on the monitor:
$ gst-launch-1.0 -v videotestsrc ! imxv4l2sink
i.MX6 major elements
| Prefix |
Element Name |
description |
|---|---|---|
| mp3enc.imx | mfw_mp3encoder | mp3 audio encoder |
| v4lsink.imx | imxv4l2sink | v4l2 video sink |
| isink.imx | mfw_isink | IPU-based video sink |
| v4lsrc.imx | imxv4l2src | v4l2 based camera src |
| vpu.imx | vpudec | VPU-based video decoder |
| vpu.imx | vpuenc | VPU-based video encoder |
| ipucsc.imx | mfw_ipucsc | IPU-based video converter |
Test Pattern Stream
Test pattern allows you to display pre build image/video patterns on the display. It is very useful when you don't have a camera but still want to test GStreamer.
Default test pattern:
$ gst-launch-1.0 -v videotestsrc ! imxv4l2sink
Test pattern with specific paramters on the input element
$ gst-launch-1.0 videotestsrc pattern=circular ! imxv4l2sink
Test pattern with specific paramters on the output element
$ gst-launch-1.0 videotestsrc ! imxv4l2sink overlay-width=1280 overlay-height=720
Test pattern with specific paramters on the input and output elements
$ gst-launch-1.0 videotestsrc pattern=circular ! imxv4l2sink overlay-width=1280 overlay-height=720
Camera Loopback
Stream video from a camera to a display
$ gst-launch imxv4l2src device=/dev/video0 capture-mode=4 fps-n=30 queue-size=7 ! queue max-size-buffers=3 ! imxv4l2sink disp-width=1280 disp-height=720
- capture-mode ov5460 options:
- ov5640_mode_VGA_640_480 = 0,
- ov5640_mode_QVGA_320_240 = 1,
- ov5640_mode_NTSC_720_480 = 2,
- ov5640_mode_PAL_720_576 = 3,
- ov5640_mode_720P_1280_720 = 4,
- ov5640_mode_1080P_1920_1080 = 5
This is a 3 elements pipe,the queue in the middle is a GStreamer element.
Video Encode
Encode video from a camera into a file.
720p:
$ gst-launch imxv4l2src capture-mode=4 fps-n=30 ! queue ! vpuenc codec=6 ! matroskamux ! filesink location=test.avi
1080p:
$ gst-launch imxv4l2src capture-mode=5 fps-n=30 ! queue ! vpuenc codec=6 ! matroskamux ! filesink location=test.avi
- The codec type for encoding
- flags: readable, writable
- Enum "vpuenc_codec" Default: 0, "mpeg4"
- (0): mpeg4 - video/mpeg,
- (5): h263 - video/x-h263
- (6): avc - video/x-h264
- (12): mjpg - image/jpeg
Simple Movie Play
$ gst-launch playbin2 uri=file:/run/media/sda1/big_buck_bunny.mp4