VAR-SOM-MX8 rev changelog

VAR-SOM-MX8 changelog

VAR-SOM-MX8 V1.4

Hardware Changes

Updated Board & SOM Design to support Analog Devices Inc Ethernet PHY.

Old Manufacturer	Old MPN	New Manufacturer	New MPN
Qualcomm	AR8033-AL1A-R / AR8033-AL1B-R	Analog Devices Inc	ADIN1300BCPZ

Software Changes

Variscite is updating all relevant software repositories and recommends impacted users to upgrade to the latest software version or to update their U-Boot and kernel to the latest commit ID of the branch they are already based on.
The following are the relevant patches:

Release	U-Boot	Kernel
Yocto Dunfell / B2Qt Dunfell / Debian Bullseye (kernel 5.4.142)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) imx8qm_var_som: fec1: tune phy-reset-post-delay with proper value	1) imx8_var_defconfig: enable driver for ADIN PHY 2) imx8qm-var-som: fec: add phy-reset-post-delay
Yocto Zeus (kernel 5.4.3)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) imx8qm-var-som: fec: add phy-reset-post-delay	1) imx8_var_defconfig: enable driver for ADIN PHY 2) imx8qm-var-som: fec: add phy-reset-post-delay
Yocto Sumo / B2Qt Sumo / Debian Buster (kernel 4.14.98)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) mx8qm_var_som: fec: add phy-reset-post-delay	1) net: fec: register ADIN1300 PHY fixup to configure rgmii 2) imx8qm-var-som: fec: add phy-reset-post-delay
Android 11.0.0_1.0.0 (kernel 5.4.47)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) imx8qm_var_som: fec1: tune phy-reset-post-delay with proper value	1) imx8_var_android_defconfig: enable driver for ADIN PHY 2) imx8qm-var-som: fec: add phy-reset-post-delay
Android 10.0.0_2.5.0 (kernel 5.4.47)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) var_imx8qm_som: fec1: tune phy-reset-post-delay with proper value	1) imx8_var_android_defconfig: enable driver for ADIN PHY 2) imx8qm-var-som: fec: add phy-reset-post-delay
Pie 9.0.0_2.0.0 (kernel 4.14.98)	1) variscite: eth: ADIN1300: Disable RGMII RX clock delay 2) mx8qm_var_som: fec: add phy-reset-post-delay	1) net: fec: register ADIN1300 PHY fixup to configure rgmii 2) imx8qm-var-som: fec: add phy-reset-post-delay

Note: These patches are backward-compatible with the previous SOM revisions.