VAR-SOM-AM33 Linux SDK 7 Configurations
From Variscite Wiki
VAR-SOM-AM33 SDK 7.0 typical configurations
LCD porting
Refer to:LCD porting
Installing Graphics SDK
Refer to: Installing Graphics SDK
Change u-boot default Ethernet port to Gbit Ethernet
Default ethernet port is defined in the below struct in board/ti/var-som-am33/board.c Changing the order of the definition of the ports determines the default port, when the last defined port is the default.
static struct cpsw_slave_data cpsw_slaves[] = {
{
.slave_reg_ofs = 0x308,
.sliver_reg_ofs = 0xdc0,
.phy_addr = 7,
},
{
.slave_reg_ofs = 0x208, //Default u-boot port is 10/100 port
.sliver_reg_ofs = 0xd80,
.phy_addr = 0,
},
}
;