Yocto Build U-Boot: Difference between revisions

From Variscite Wiki
No edit summary
Line 12: Line 12:
  $ git clone {{#var:U-BOOT_GIT}}
  $ git clone {{#var:U-BOOT_GIT}}
  $ cd uboot-imx
  $ cd uboot-imx
  $ git checkout -b {{#var:U-BOOT_BRANCH}} origin/{{#var:U-BOOT_BRANCH}}
  $ git checkout {{#var:U-BOOT_BRANCH}}


Build U-Boot:
Build U-Boot:

Revision as of 11:05, 8 June 2017

Yocto Build U-Boot from source code

Toolchain installation for out of Yocto builds

To install the toolchain, follow Yocto Toolchain installation.

Build U-Boot out of Yocto tree

Obtain sources:

$ git clone 
$ cd uboot-imx
$ git checkout 

Build U-Boot:

$ source 
$ make mrproper
Choose one of the following configurations:

For booting from SD card/eMMC:
$ make 

For booting from NAND flash:
$ make 
$ make -j4

Install the built U-Boot on an SD card

$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1; sync
$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69; sync
(Replace /dev/sdX with the correct device)

If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card:

$ sudo cp SPL /media/rootfs/opt/images/...
$ sudo cp u-boot.img /media/rootfs/opt/images/...

And eject the SD card gracefully from host machine.

Update your U-Boot out of Yocto tree

$ git pull