Recovery SD card general: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
Line 18: Line 18:
=== Using a Windows based host ===
=== Using a Windows based host ===
* Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/ and install it.
* Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/ and install it.
* Extract downloaded x.img.gz file  to get x.img (using [http://www.7-zip.org/ 7-Zip] for example)
* Extract downloaded <image name>.img.gz file  to get <image name>.img (using [http://www.7-zip.org/ 7-Zip] for example)
* Insert your SD card into your PC. <br>No need to format the SD card before writing the image to it, as the card will be formatted once it will be flashed.
* Insert your SD card into your PC. <br>No need to format the SD card before writing the image to it, as the card will be formatted once it will be flashed.
* Run the file named Win32DiskImager.exe (in Windows 7,8 and 10 we recommend that you right-click this file and choose “Run as administrator”). 
* Run the file named Win32DiskImager.exe (in Windows 7,8 and 10 we recommend that you right-click this file and choose “Run as administrator”). 
* If the SD card (Device) you are using isn’t found automatically. Click on the drop down box and select it 
* If the SD card (Device) you are using isn’t found automatically. Click on the drop down box and select it 
{{note| Double check that the device is correct to avoid accidentally overwriting a different device.}}
{{note| Double check that the device is correct to avoid accidentally overwriting a different device.}}
* In the Image File box, choose the x.img file you have extracted previously 
* In the Image File box, choose the <image name>.img file you have extracted previously 
* Click Write 
* Click Write 
* After a few minutes, you receive a notification that your SD has been created successfully. 
* After a few minutes, you receive a notification that your SD has been created successfully. 
=== Using a Mac OS/X host ===
You can use the [https://www.thefanclub.co.za/how-to/dd-utility-write-and-backup-operating-system-img-files-memory-card-mac-os-x OSX DD Tool] to flash .img files onto your sd card:

Revision as of 16:36, 7 March 2017

VAR-SOM-MX6 - Yocto/Android recovery SD card general

Variscite provides a recovery SD card image that can be used to install the pre-built Yocto or Andorid images into the internal storage device/s of the SOM.

Download the recovery SD card image

Download mx6-som-recovery-sd.vXX.img.gz (latest) from Variscite's FTP server: ftp://customerv:Variscite1@ftp.variscite.com/VAR-SOM-MX6/Software/

Write the image to an SD card

Using a Linux based host

Plug-in the SD card to your Linux HOST PC, run dmesg and see which device is added (i.e. /dev/sdX or /dev/mmcblkX)

$ gunzip mx6-som-recovery-sd.vXX.img.gz
$ sudo umount /dev/sdX*
$ sudo dd if=mx6-som-recovery-sd.vXX.img of=/dev/sdX bs=1M

(Replace /dev/sdX with your actual device)

Using a Windows based host

  • Download Win32 Disk Imager from: https://sourceforge.net/projects/win32diskimager/ and install it.
  • Extract downloaded <image name>.img.gz file to get <image name>.img (using 7-Zip for example)
  • Insert your SD card into your PC.
    No need to format the SD card before writing the image to it, as the card will be formatted once it will be flashed.
  • Run the file named Win32DiskImager.exe (in Windows 7,8 and 10 we recommend that you right-click this file and choose “Run as administrator”). 
  • If the SD card (Device) you are using isn’t found automatically. Click on the drop down box and select it 
Double check that the device is correct to avoid accidentally overwriting a different device.
  • In the Image File box, choose the <image name>.img file you have extracted previously 
  • Click Write 
  • After a few minutes, you receive a notification that your SD has been created successfully. 

Using a Mac OS/X host

You can use the OSX DD Tool to flash .img files onto your sd card: